home-assistant.io/source/_integrations/eheimdigital.markdown

title, description, ha_category, ha_release, ha_iot_class, ha_config_flow, ha_codeowners, ha_domain, ha_integration_type, ha_platforms, ha_quality_scale, ha_zeroconf

title	description	ha_category	ha_release	ha_iot_class	ha_config_flow	ha_codeowners	ha_domain	ha_integration_type	ha_platforms	ha_quality_scale	ha_zeroconf
EHEIM Digital	Instructions on how to set up EHEIM Digital with Home Assistant.	Climate Light Number Select Sensor Switch Time	2025.1	Local Polling	true	@autinerd	eheimdigital	hub	climate diagnostics light number select sensor switch time	bronze	true

The EHEIM Digital {% term integration %} allows you to control your EHEIM Digital smart aquarium devices from Home Assistant.

{% include integrations/config_flow.md %}

{% configuration_basic %} Host: description: "The IP address or hostname of your EHEIM Digital main device. Defaults to eheimdigital.local, an IP address should only be necessary if the hostname doesn't work." required: true type: string {% endconfiguration_basic %}

Supported devices and entities

Currently, the following devices and entities are supported:

All devices

Number

• System LED brightness: Controlling the brightness of the system LED

EHEIM classicLEDcontrol+e

Lights

• Brightness: Controlling the brightness of both light channels
• Daycycle mode effect: Automatically controls the brightness based on the daytime as configured on the device

EHEIM thermocontrol+e

Climate

• Target temperature: Controlling the target temperature of the heater (which corresponds to the day temperature in Bio and Smart mode)
• Presets / Operation mode: Switching between Manual, Bio and Smart mode

Number

• Temperature offset: Setting an offset between the measured temperature and the real temperature
• Night temperature offset: Setting the offset for the night temperature in Bio mode

Time

• Day start time: Setting the start time for the day temperature in Bio mode
• Night start time: Setting the start time for the night temperature in Bio mode

EHEIM classicVARIO+e

Number

• Manual speed: Setting the pump speed in Manual mode
• Day speed: Setting the pump speed for the day in Bio mode
• Night speed: Setting the pump speed for the night in Bio mode

Select

• Filter mode: Setting the filter mode
  • Manual mode: The filter uses the manual speed
  • Pulse mode: The filter uses a high and low pulse, the speeds are configured via high pulse speed and low pulse speed, the durations are configured via high pulse duration and low pulse duration
  • Bio mode: The filter uses a day and night rhythm, the speeds are configured via day speed and night speed, the start times of day and night are configured via day start time and night start time

Sensor

• Current pump speed: Displays the current pump speed
• Remaining hours until service: Displays the remaining time until the filter needs to be serviced
• Error code: Displays the current error code of the device (No error, Rotor stuck, air in filter)

Switch

• Pump: Turning on and off the filter pump

Time

• Day start time: Setting the start time for the day pump speed in Bio mode
• Night start time: Setting the start time for the night pump speed in Bio mode

Support for additional EHEIM Digital devices and entities will be added in future updates.

Removing the integration

This integration follows standard integration removal, no extra steps are required.

{% include integrations/remove_device_service.md %}