home-assistant.io/source/_integrations/nexia.markdown

title, description, ha_category, ha_release, ha_iot_class, ha_config_flow, ha_codeowners, ha_domain, ha_dhcp, ha_platforms, ha_integration_type

title	description	ha_category	ha_release	ha_iot_class	ha_config_flow	ha_codeowners	ha_domain	ha_dhcp	ha_platforms	ha_integration_type
Nexia/American Standard/Trane	Instructions on how to integrate Trane and American Standard thermostats into Home Assistant.	Binary sensor Climate Scene Sensor Switch	0.108	Cloud Polling	true	@bdraco	nexia	true	binary_sensor climate diagnostics number scene sensor switch	integration

The nexia integration allows you to integrate your Nexia (Trane) thermostats or American Standard thermostats into Home Assistant.

There is currently support for the following device types within Home Assistant:

• Binary sensor
• Climate
• Sensor
• Scene
• Switch

{% include integrations/config_flow.md %}

Binary sensor

The following binary sensors are added for each thermostat:

• Blower Active

Sensor

The following sensors are added for each thermostat:

• Air Cleaner Mode
• Current Compressor Speed
• Requested Compressor Speed
• Outdoor Temperature
• Relative Humidity
• System Status

The following sensors are added for each thermostat zone:

• Zone Temperature
• Zone Setpoint Status
• Zone Status

Climate

The climate platform lets you control a thermostat.

The following Trane thermostats are supported: XL1050, XL850, XL824

The following American Standard thermostats have been reported to work: AZONE1050, AZONE850, ACONT824

The following thermostats are not supported: XL624, XL950, AZONE950, AZEMT500, AZEMT400B

Other thermostats may work, but they have not been tested.

Number

The number platform lets you adjust the fan speed on systems with variable-speed fan support.

Scene

The scene platform lets you activate a nexia automation.

Switch

The following enable/disable switches are added for each thermostat:

• Emergency heat (if the device supports it)

The following enable/disable switches are added for each thermostat zone:

• Hold mode

The following include/exclude {% term switch %} is added for each RoomIQ sensor (if the device supports RoomIQ).

• Include YOUR_SENSOR_NAME (with your sensor name)

These switches allow you to select which RoomIQ sensors to include in a zone's average temperature. To change your selected sensors, set each switch to represent your choice. Several seconds after the last such change, the selection is sent to the manufacturer's web service. It usually takes 10–15 seconds to complete, depending on the web service. At least one sensor must be selected. If you exclude all sensors, the switches will revert to show the zone's settings.

Action nexia.set_aircleaner_mode

Sets the air cleaner mode. Options include 'auto', 'quick', and 'allergy'. This setting will affect all zones on the same thermostat.

Data attribute	Optional	Description
entity_id	no	String or list of strings that point at entity_id's of climate devices to control.
aircleaner_mode	no	'auto', 'quick', or 'allergy'

Action nexia.set_humidify_setpoint

Sets the humidify setpoint. This setting will affect all zones on the same thermostat.

Data attribute	Optional	Description
entity_id	no	String or list of strings that point at entity_id's of climate devices to control.
humidity	no	Humidify setpoint level, from 35 to 65.