mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-06-23 18:46:50 +00:00
69 lines
2.5 KiB
Markdown
69 lines
2.5 KiB
Markdown
---
|
|
title: PG LAB Electronics
|
|
description: Instructions on how to integrate PG LAB Electronics with Home Assistant.
|
|
ha_category:
|
|
- Cover
|
|
- Sensor
|
|
- Switch
|
|
ha_release: '2025.3'
|
|
ha_iot_class: Local Push
|
|
ha_config_flow: true
|
|
ha_codeowners:
|
|
- '@pglab-electronics'
|
|
ha_domain: pglab
|
|
ha_platforms:
|
|
- cover
|
|
- sensor
|
|
- switch
|
|
ha_integration_type: integration
|
|
ha_quality_scale: bronze
|
|
---
|
|
|
|
The **PG LAB Electronics** {% term integrations %} allows you to control [PG LAB Electronics](https://www.pglab.dev/) devices in Home Assistant.
|
|
|
|
## Supported devices
|
|
|
|
- [E-BOARD](https://www.pglab.dev/shop/p/e-board): Controller board to interface I2C devices by a local LAN connection.
|
|
- [E-RELAY](https://www.pglab.dev/shop/p/e-relay): 8 Channels relay board controlled by I2C connection.
|
|
- [E-SWITCH]: Coming soon
|
|
|
|
Each E-BOARD device can be connected to a maximum of 8 E-RELAY boards. E-BOARD can control
|
|
up to 64 relays or 32 shutters or a mixed configuration.
|
|
|
|
## Prerequisites
|
|
|
|
- MQTT broker and the [MQTT integration](/integrations/mqtt/) set up in Home Assistant.
|
|
- PG LAB Electronics devices MQTT setting configured to communicate with the MQTT broker.
|
|
|
|
Once the device is connected to your MQTT broker, it should be discovered by Home Assistant.
|
|
Add PG LAB Electronics integration.
|
|
|
|
### Device configuration
|
|
|
|
Configure each PG LAB Electronics devices following these steps:
|
|
|
|
1. Power the device and connect it to your local network.
|
|
2. From your router, get the IP address of your device (for example: 192.168.1.7).
|
|
3. Connect to the internal device web server with a web browser (**don't** use 'https://...', instead, connect to 'http://192.168.1.7').
|
|
4. Change the default device name. Use a unique, meaningful name such as E_Board_Office, or E_Board_Garden.
|
|
- **Note:** Every device **MUST** have a unique name.
|
|
5. Set up the MQTT broker address, port number, username, and password.
|
|
6. Save the configuration and restart the device.
|
|
|
|
{% include integrations/config_flow.md %}
|
|
|
|
## Supported features
|
|
|
|
PG LAB Electronics relays, sensors, and switches are supported.
|
|
|
|
- PG LAB Relays will be added as Home Assistant `switch` entities.
|
|
- PG LAB Shutters will be added as Home Assistant `cover` entities.
|
|
- PG LAB Sensors will be added as Home Assistant `sensor` entities.
|
|
- The integration will also create diagnostic status sensors, with device different information.
|
|
|
|
## Removing the integration
|
|
|
|
This integration follows standard integration removal. No extra steps are required.
|
|
|
|
{% include integrations/remove_device_service.md %}
|