mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-05-28 05:46:48 +00:00
75 lines
2.1 KiB
Markdown
75 lines
2.1 KiB
Markdown
---
|
|
title: Cisco IOS
|
|
description: Instructions on how to integrate Cisco IOS routers into Home Assistant.
|
|
ha_category:
|
|
- Presence Detection
|
|
ha_release: 0.33
|
|
ha_codeowners:
|
|
- '@fbradyirl'
|
|
ha_domain: cisco_ios
|
|
---
|
|
|
|
This is a presence detection scanner for [Cisco IOS](https://www.cisco.com/) devices.
|
|
|
|
<div class='note warning'>
|
|
This device tracker needs SSH to be enabled on the router.
|
|
</div>
|
|
|
|
Before using this scanner it is recommended that you lower the ARP cache timeout on your router, as Cisco IOS normally comes with a 4 hour default ARP cache timeout.
|
|
|
|
For example, the following commands will lower the timeout to 2 minutes on Vlan1:
|
|
|
|
```bash
|
|
# 1. use this command to see what Vlan your devices are on
|
|
show ip arp
|
|
|
|
# 2. Go into configure mode
|
|
conf t
|
|
|
|
# 3. Use the Vlan name as you see it from step 1 above
|
|
interface Vlan1
|
|
|
|
# 4. Set a new arp cache timeout
|
|
arp timeout 120
|
|
|
|
# 5. Exit
|
|
# Press <ctrl+c> to exit configure mode
|
|
|
|
# 6. Don't forget to save the new config, so that it will survive a reboot
|
|
copy running-config startup-config
|
|
```
|
|
|
|
<div class='note warning'>
|
|
|
|
If you have a very large number of devices on your VLan (+1000), then you may want to adjust the ARP cache timeout to suit your needs. See [this discussion](https://supportforums.cisco.com/discussion/10169296/arp-timeout) to learn more.
|
|
|
|
</div>
|
|
|
|
To use this device tracker in your installation, add the following to your `configuration.yaml` file:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
device_tracker:
|
|
- platform: cisco_ios
|
|
host: ROUTER_IP_ADDRESS
|
|
username: YOUR_ADMIN_USERNAME
|
|
password: YOUR_ADMIN_PASSWORD
|
|
```
|
|
|
|
{% configuration %}
|
|
host:
|
|
description: The IP address of your router, e.g., 192.168.1.1.
|
|
required: true
|
|
type: string
|
|
username:
|
|
description: The username of an user with administrative privileges.
|
|
required: true
|
|
type: string
|
|
password:
|
|
description: The password for your given admin account.
|
|
required: true
|
|
type: string
|
|
{% endconfiguration %}
|
|
|
|
See the [device tracker integration page](/integrations/device_tracker/) for instructions how to configure the people to be tracked.
|