home-assistant.io/source/getting-started/z-wave-device-specific.markdown

layout, title, description, date, sidebar, comments, sharing, footer

layout	title	description	date	sidebar	comments	sharing	footer
page	Z-Wave Device Specific Settings	Extended instructions how to setup Z-Wave.	2016-03-24 08:49 -0700	true	false	true	true

{% linkable_title Aeon Minimote %}

Here's a handy configuration for the Aeon Labs Minimote that defines all possible button presses. Put it into automation.yaml.

- alias: Minimote Button 1 Pressed
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 1

- alias: Minimote Button 1 Held
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 2

- alias: Minimote Button 2 Pressed
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 3

- alias: Minimote Button 2 Held
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 4

- alias: Minimote Button 3 Pressed
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 5

- alias: Minimote Button 3 Held
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 6

- alias: Minimote Button 4 Pressed
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 7

- alias: Minimote Button 4 Held
  trigger:
    platform: event
    event_type: zwave.scene_activated
    event_data:
      entity_id: aeon_labs_minimote_1
      scene_id: 8

{% linkable_title Aeotec MultiSensor 6 %}

In order for Home Assistant to recognize well the motion sensor, you will need to change its configuration from Basic Set (default) to Binary Sensor report. Currently there's no way to do this in Home Assistant but you can use ozwcp (OpenZWave control panel), Domoticz or similar to do it