home-assistant.io/source/getting-started/z-wave.markdown

layout, title, description, date, sidebar, comments, sharing, footer

layout	title	description	date	sidebar	comments	sharing	footer
page	Z-Wave	Instructions how to integrate your existing Z-Wave within Home Assistant.	2016-02-27 19:59	true	false	true	true

Z-Wave integration for Home Assistant allows you to observe and control connected Z-Wave devices. Z-Wave support requires a supported Z-Wave USB stick or module to be plugged into the host.

There is currently support for climate, covers, lights, locks, sensors, switches and thermostats. All will be picked up automatically after configuring this platform.

{% linkable_title Installation %}

To allow Home Assistant to talk to your Z-Wave USB stick you will have to compile the OpenZWave library and install the related python-OpenZWave package. This can be done as follows. (Note: The Home Assistant docker image and the All In One installer have support for Z-Wave already built-in!)

Make sure you have the correct dependencies installed before running the script:

$ sudo apt-get install cython3 libudev-dev python3-sphinx python3-setuptools git

Make sure you have at least version 0.23 and at the most 0.24.1 of cython.

$ sudo pip3 install --upgrade cython==0.24.1

Then get the OpenZWave files and switch to the python3 branch:

Do not use root to build python-openzwave as it will surely fail.

$ git clone https://github.com/OpenZWave/python-openzwave.git
$ cd python-openzwave
$ git checkout python3
$ PYTHON_EXEC=$(which python3) make build
$ sudo PYTHON_EXEC=$(which python3) make install

Instead of `make install`, you can alternatively build your own python-openzwave package which can be easily uninstalled:

$ sudo apt-get install -y checkinstall
$ sudo PYTHON_EXEC=$(which python3) checkinstall --pkgname python-openzwave --pkgversion 1.0 --provides python-openzwave

With this installation, your config_path needed below will resemble:

/usr/local/lib/python3.4/dist-packages/libopenzwave-0.3.0b8-py3.4-linux-x86_64.egg/config

If you followed along with setting up a virtual environment, your path will be:

/srv/hass/python-openzwave/openzwave/config

{% linkable_title Configuration %}

# Example configuration.yaml entry
zwave:
  usb_path: /dev/ttyUSB0

Configuration variables:

• usb_path (Optional): The port where your device is connected to your Home Assistant host.
• config_path (Optional): The path to the Python OpenZWave configuration files. Defaults to the folder config in your Python OpenZWave install directory.
• autoheal (Optional): Allows disabling auto Z-Wave heal at midnight. Defaults to True.
• polling_interval (Optional): The time period in milliseconds between polls of a nodes value. Be careful about using polling values below 30000 (30 seconds) as polling can flood the zwave network and cause problems.
• customize (Optional): This attribute contains node-specific override values:
  • polling_intensity (Optional): Enables polling of a value and sets the frequency of polling (0=none, 1=every time through the list, 2=every other time, etc). If not specified then your device will not be polled.
  • ignored (Optional): Ignore this entitiy completely. It won't be shown in the Web Interface and no events are generated for it.
  • refresh_value (Optional): Enable refreshing of the node value. Only the light component uses this. Defaults to False.
  • delay (Optional): Specify the delay for refreshing of node value. Only the light component uses this. Defaults to 2 seconds.
• debug (Optional): Print verbose z-wave info to log. Defaults to False.

To find the path of your Z-Wave USB stick or module, run:

$ ls /dev/ttyUSB*

Or, on some other systems (such as Raspberry Pi), use:

$ ls /dev/ttyACM*

# If `hass` runs with another user (e.g. *homeassistant* on Hassbian) give access to the stick with:
$ sudo usermod -a -G dialout homeassistant

Or, on some other systems (such as Pine 64), use:

$ ls /dev/ttyS*

Or, on macOS, use:

$ ls /dev/cu.usbmodem*

Depending on what's plugged into your USB ports, the name found above may change. You can lock in a name, such as `/dev/zwave`, by following [these instructions](http://hintshop.ludvig.co.nz/show/persistent-names-usb-serial-devices/).

{% linkable_title Adding Devices %}

To add a Z-Wave device to your system, go to the Services menu and select the zwave domain, and select the add-node service. Then find your device's add button and press that as well.

{% linkable_title Adding Security Devices %}

Security Z-Wave devices require a network key before being added to the network using the zwave.add_node_secure service. You must edit the options.xml file, located in your python-openzwave config_path to use a network key before adding these devices.

Edit your options.xml file:

  <!-- <Option name="NetworkKey" value="0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F 0x10" /> -->

Uncomment the line:

   <Option name="NetworkKey" value="0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10" />

You can replace these values with your own 16 byte network key. For more information on this process see the OpenZwave wiki article Adding Security Devices to OZW

An easy script to generate a random key:

cat /dev/urandom | tr -dc '0-9A-F' | fold -w 32 | head -n 1 | sed -e 's/\(..\)/0x\1, /g'

{% linkable_title Events %}

{% linkable_title zwave.network_complete %}

Home Assistant will trigger a event when the Z-Wave network is complete. Meaning all of the nodes on the network have been queried. This can take quite some time, depending on wakeup intervals on the battery powered devices on the network.

 - alias: Z-Wave network is complete
   trigger:
     platform: event
     event_type: zwave.network_complete

{% linkable_title zwave.network_ready %}

Home Assistant will trigger a event when the Z-Wave network is ready for use. Between zwave.network_start and zwave.network_ready Home Assistant will feel sluggish when trying to send commands to Z-Wave nodes. This is because the controller is requesting information from all of the nodes on the network. When this is triggered all awake nodes have been queried and sleeping nodes will be queried when they awake.

 - alias: Z-Wave network is ready
   trigger:
     platform: event
     event_type: zwave.network_ready

{% linkable_title zwave.network_start %}

Home Assistant will trigger a event when the Z-Wave network is set up to be started.

 - alias: Z-Wave network is starting
   trigger:
     platform: event
     event_type: zwave.network_start

{% linkable_title zwave.network_stop %}

Home Assistant will trigger a event when the Z-Wave network stopping.

 - alias: Z-Wave network is stopping
   trigger:
     platform: event
     event_type: zwave.network_stop

{% linkable_title zwave.node_event %}

Home Assistant will trigger a event when command_class_basic changes value on a node. This can be virtually anything, so tests have to be made to determine what value equals what. You can use this for automations.

Example:

 - alias: Minimote Button Pressed
   trigger:
     platform: event
     event_type: zwave.node_event
     event_data:
       object_id: aeon_labs_minimote_1
       basic_level: 255

The object_id and basic_level of all triggered events can be seen in the console output.

{% linkable_title zwave.scene_activated %}

Some devices can also trigger scene activation events, which can be used in automation scripts (for example the press of a button on a wall switch):

# Example configuration.yaml automation entry
automation:
  - alias: Turn on Desk light
    trigger:
      platform: event
      event_type: zwave.scene_activated
      event_data:
        object_id: zwaveme_zme_wallcs_secure_wall_controller_8
        scene_id: 11

The object_id and scene_id of all triggered events can be seen in the console output.

{% linkable_title Services %}

The zwave component exposes multiple services to help maintain the network.

Service	Description
add_node	Put the Z-Wave controller in inclusion mode. Allows one to add a new device to the Z-Wave network.
add_node_secure	Put the Z-Wave controller in secure inclusion mode. Allows one to add a new device with secure communications to the Z-Wave network.
cancel_command	Cancels a running Z-Wave command. If you have started a add_node or remove_node command, and decides you are not going to do it, then this must be used to stop the inclusion/exclusion command.
change_association	Add or remove an association in the Z-Wave network
heal_network	Tells the controller to "heal" the Z-Wave network. Basically asks the nodes to tell the controller all of their neighbors so the controller can refigure out optimal routing.
print_config_parameter	Prints Z-wave node's config parameter value to the log.
remove_node	Put the Z-Wave controller in exclusion mode. Allows one to remove a device from the Z-Wave network.
rename_node	Sets a node's name. Requires an entity_id and name field.
set_config_parameter	Let's the user set a config parameter to a node.
soft_reset	Tells the controller to do a "soft reset". This is not supposed to lose any data, but different controllers can behave differently to a "soft reset" command.
start_network	Starts the Z-Wave network.
stop_network	Stops the Z-Wave network.
test_network	Tells the controller to send no-op commands to each node and measure the time for a response. In theory, this can also bring back nodes which have been marked "presumed dead".

The soft_reset and heal_network commands can be used as part of an automation script to help keep a Z-Wave network running reliably as shown in the example below. By default, Home Assistant will run a heal_network at midnight. This is a configuration option for the zwave component, the option defaults to true but can be disabled by setting autoheal to false. Using the soft_reset function with some Z-Wave controllers can cause the Z-Wave network to hang. If you're having issues with your Z-Wave network try disabling this automation.

# Example configuration.yaml automation entry
automation:
  - alias: soft reset at 2:30am
    trigger:
      platform: time
      after: '2:30:00'
    action:
      service: zwave.soft_reset

  - alias: heal at 2:31am
    trigger:
      platform: time
      after: '2:31:00'
    action:
      service: zwave.heal_network