mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-05-01 08:47:35 +00:00
b39bd81c6e
* Spelling fixes * "It's" -> "its" fixes * Fix capitalization of "Pi" in "Raspberry Pi" "Pi", not "PI" or "pi".
39 lines
1.3 KiB
Markdown
39 lines
1.3 KiB
Markdown
---
|
|
layout: page
|
|
title: "Raspberry Pi GPIO Binary Sensor"
|
|
description: "Instructions how to integrate the GPIO sensor capability of a Raspberry Pi into Home Assistant."
|
|
date: 2015-08-30 19:00
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: raspberry-pi.png
|
|
ha_category: Binary Sensor
|
|
ha_release: pre 0.7
|
|
ha_iot_class: "Local Push"
|
|
---
|
|
|
|
The `rpi_gpio` binary sensor platform allows you to read sensor values of the GPIOs of your [Raspberry Pi](https://www.raspberrypi.org/).
|
|
|
|
To use your Raspberry Pi's GPIO in your installation, add the following to your `configuration.yaml` file:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
binary_sensor:
|
|
- platform: rpi_gpio
|
|
ports:
|
|
11: PIR Office
|
|
12: PIR Bedroom
|
|
```
|
|
|
|
Configuration variables:
|
|
|
|
- **ports** array (*Required*): Array of used ports.
|
|
- **port: name** (*Required*): Port numbers (BCM mode pin numbers) and corresponding names.
|
|
- **pull_mode** (*Optional*): The internal pull to use (UP or DOWN). Default is UP.
|
|
- **bouncetime** (*Optional*): The time in milliseconds for port debouncing. Default is 50ms.
|
|
- **invert_logic** (*Optional*): If true, inverts the output logic to ACTIVE LOW. Default is false (ACTIVE HIGH).
|
|
|
|
For more details about the GPIO layout, visit the Wikipedia [article](https://en.wikipedia.org/wiki/Raspberry_Pi#GPIO_connector) about the Raspberry Pi.
|
|
|