home-assistant.io/source/_components/climate.heatmiser.markdown

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category	ha_release
page	Heatmiser Thermostat	Instructions how to integrate Heatmiser thermostats within Home Assistant.	2015-12-11 12:35	true	false	true	true	heatmiser.png	Climate	0.10

The heatmiser climate platform let you control Heatmiser DT/DT-E/PRT/PRT-E thermostats from Heatmiser. The module itself is currently setup to work over a RS232 -> RS485 converter, therefore it connects over IP.

Further work would be required to get this setup to connect over Wifi, but the HeatmiserV3 python module being used is a full implementation of the V3 protocol. If you would like to contribute to making this work over wifi, please contact @andylockran on github.

To set it up, add the following information to your configuration.yaml file:

climate:
  platform: heatmiser
  ipaddress: YOUR_IPADDRESS
  port:  YOUR_PORT
  tstats:
    - 1:
      id: THERMOSTAT_ID
      name: THERMOSTAT_NAME

A single interface can handle up to 32 connected devices.

Configuration variables:

• ipaddress (Required): The ip address of your interface.
• port (Required): The port that the interface is listening on.
• tstats (Required): A list of thermostats activated on the gateway.
• id (Required): The id of the thermostat as configured on the device itself
• name (Required): A friendly name for the themostat