jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-05-05 10:38:58 +00:00
Code Issues Packages Projects Releases Wiki Activity
home-assistant.io/source/_components/switch.dlink.markdown
Christian Brædstrup 91c0e6488a D-Link switch added legacy protocol variable (#899)
2016-09-07 15:52:43 +02:00

1.3 KiB
Raw Blame History

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_iot_class, ha_release
layout title description date sidebar comments sharing footer logo ha_category ha_iot_class ha_release
page D-Link Switch Instructions how to integrate D-Link switches into Home Assistant. 2016-02-21 09:00 true false true true dlink.png Switch Local Polling 0.14

The dlink switch platform allows you to control the state of your D-Link Wi-Fi Smart Plugs.

Supported devices (tested):

  • DSP-W215
  • DSP-W110

To use your D-Link smart plugs in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
switch:
  platform: dlink
  host: IP_ADRRESS
  name: D-Link plug
  username: YOUR_USERNAME
  password: YOUR_PASSWORD
  use_legacy_protocol: False

Configuration variables:

  • host (Required): The IP address of your D-Link plug, eg. http://192.168.1.32
  • name (Optional): The name to use when displaying this switch.
  • username (Required): The username for your plug. Defaults to admin.
  • password (Required): The password for your plug. Default password is the PIN inlcuded on the configuration card.
  • use_legacy_protocol (Optional): Enable limited support for legacy firmware protocols (Tested with v1.24).