home-assistant.io/source/_components/binary_sensor.bbb_gpio.markdown

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release, ha_iot_class

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category	ha_release	ha_iot_class
page	BeagleBone Black GPIO Binary Sensor	Instructions on how to integrate the GPIO sensor capability of a BeagleBone Black into Home Assistant.	2017-01-14 10:00	true	false	true	true	beaglebone-black.png	DIY	0.37	Local Push

The bbb_gpio binary sensor platform allows you to read sensor values of the GPIOs of your BeagleBone Black.

{% linkable_title Configuration %}

To use your BeagleBone Black's GPIO in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
binary_sensor:
  - platform: bbb_gpio
    pins:
      P8_12:
        name: Door
      GPIO0_26:
        name: Window

Configuration variables:

• pins array (Required): Array of used pins.
  • pin_name (Required): Pin numbers and corresponding names.
    • name (Required): Friendly name to use for the frontend.
    • bouncetime (Optional): Debounce time for reading input pin defined in milliseconds [ms]. Defaults to 50 ms.
    • invert_logic (Optional): If true, inverts the input logic to ACTIVE LOW. Default is false (ACTIVE HIGH).
    • pull_mode (Optional): Type of internal pull resistor connected to input. Options are UP - pull-up resistor and DOWN - pull-down resistor. Defaults to UP.

For more details about the GPIO layout, visit the article about the BeagleBone Black.