home-assistant.io/source/_integrations/greeneye_monitor.markdown

title, description, ha_category, ha_release, ha_iot_class, ha_codeowners, ha_domain, ha_platforms, ha_integration_type

title	description	ha_category	ha_release	ha_iot_class	ha_codeowners	ha_domain	ha_platforms	ha_integration_type
GreenEye Monitor (GEM)	Instructions on how to integrate your GreenEye Monitor within Home Assistant.	Energy Hub Sensor	0.82	Local Push	@jkeljo	greeneye_monitor	sensor	integration

The GreenEye Monitor (GEM) integration for Home Assistant allows you to create sensors for the various data channels of the GEM. Each current transformer (CT) channel, pulse counter, and temperature sensor appears in Home Assistant as a sensor, and can be used in automations.

Configure your GEM(s) to produce binary-format packets (for example, "Bin32 NET" for a 32-channel GEM with some channels configured for net metering) and send them to an unused port on your Home Assistant machine. (These settings are in the "Packet Send" and "Network" pages of the GEM UI.) Then specify that port and information about your monitor(s) and the data channels you wish to monitor in your configuration.yaml:

# Example configuration.yaml entry
greeneye_monitor:
  port: 8000
  monitors:
    - serial_number: "YOUR_SERIAL_NUMBER"
      channels:
        - number: 1
          name: total_power
        - number: 2
          name: solar_panels_power
          net_metering: true
      pulse_counters:
        - number: 1
          name: sprinklers_water_usage
          counted_quantity: "gal"
          counted_quantity_per_pulse: 1
          time_unit: "min"
      temperature_sensors:
        temperature_unit: "C"
        sensors:
          - number: 1
            name: back_porch_temperature
      voltage:
        - number: 1
          name: house_volts

By default, GEM will send updates every 5 seconds. That's a lot of data, and the databases used by the recorder integration for history don't do well with that much data, so it is recommended to configure the influxdb integration and exclude the GEM sensors from recorder.

{% configuration %} port: description: The port on which Home Assistant should listen for packets from your GEM. Must match the port set in the "Network" tab of the GEM setup UI. required: true type: string monitors: description: The list of monitors that should appear in Home Assistant. Data from other monitors will be ignored. required: false type: list keys: serial_number: description: Your 8-digit GEM serial number, as it appears in the UI. required: true type: string channels: description: The list of channels that should appear in Home Assistant for this monitor. Data from other channels will be ignored. required: false type: list keys: number: description: The channel number as it appears in the GEM UI. required: true type: integer name: description: The name that should be used for this channel's sensor in Home Assistant. required: true type: string net_metering: description: Set to true if the channel is configured for net metering in the GEM, otherwise false. required: false type: boolean default: false voltage: description: Configuration for voltage sensor required: false keys: number: description: A channel number that exists in the GEM. There is only one voltage sensor on current models of the GEM. required: true type: integer name: description: The name that should be used for the voltage sensor in Home Assistant. required: true type: string temperature_sensors: description: Configuration for temperature sensors required: false keys: temperature_unit: description: The unit of measure to use for the temperature (F or C) type: string required: true sensors: description: The list of temperature sensors that should appear in Home Assistant for this monitor. Data from other sensors will be ignored. required: true type: list keys: number: description: The sensor number as it appears in the GEM UI. required: true type: integer name: description: The name that should be used for this sensor in Home Assistant. required: true type: string pulse_counters: description: The list of pulse counters that should appear in Home Assistant for this monitor. Data from other pulse counters will be ignored. required: false type: list keys: number: description: The pulse counter's number as it appears in the GEM UI. required: true type: integer name: description: The name that should be used for this pulse counter in Home Assistant. required: true type: string counted_quantity: description: The unit being counted by this pulse counter (e.g., gal, L) required: true type: string counted_quantity_per_pulse: description: The number of the counted quantity represented by each pulse. required: false type: float default: 1.0 time_unit: description: The time unit to use when computing rates (s, min, or h) required: false type: string default: s {% endconfiguration %}