1833c32a2c
* Sets front matter defaults * Removes default front matter from section templates/pages * Removes default front matter from addon pages * Removes default front matter from integration pages * Removes default front matter from posts * Removes default front matter from docs pages * Removes default front matter from other pages * Fixes blog category pages
3.3 KiB
title, description, logo, ha_category, ha_release, ha_iot_class
| title | description | logo | ha_category | ha_release | ha_iot_class | |||
|---|---|---|---|---|---|---|---|---|
| Remote Raspberry Pi GPIO | Instructions on how to integrate the GPIO capability of a Remote Raspberry Pi into Home Assistant. | raspberry-pi.png |
|
0.94 | Local Push |
The rpi_gpio integration is the base for all related GPIO platforms in Home Assistant. There is no setup needed for the integration itself, for the platforms please check their corresponding sections.
Binary Sensor
The remote_rpi_gpio binary sensor platform allows you to read sensor values of the GPIOs of a Remote Raspberry Pi.
To use your Remote Raspberry Pi's GPIO in your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
binary_sensor:
- platform: remote_rpi_gpio
host: IP_ADDRESS_OF_REMOTE_PI
ports:
11: PIR Office
12: PIR Bedroom
{% configuration %}
host:
description: IP Address of remote Raspberry Pi.
required: true
type: string
ports:
description: List of used ports.
required: true
type: map
keys:
"port: name":
description: The port numbers (BCM mode pin numbers) and corresponding names.
required: true
type: string
invert_logic:
description: If true, inverts the output logic
required: false
type: boolean
default: "false (ACTIVE HIGH)"
pull_mode:
description: >
Type of internal pull resistor to use.
Options are UP - pull-up resistor and DOWN - pull-down resistor.
Pull-Up defaults to active LOW and Pull-down defaults to active HIGH. This can be adjusted with invert_logic
required: false
type: string
default: "UP"
{% endconfiguration %}
For more details about the GPIO layout, visit the Wikipedia article about the Raspberry Pi.
Switch
The remote_rpi_gpio switch platform allows you to control the GPIOs of a Remote Raspberry Pi.
To use your Remote Raspberry Pi's GPIO in your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
switch:
- platform: remote_rpi_gpio
host: IP_ADDRESS_OF_REMOTE_PI
ports:
11: Fan Office
12: Light Desk
{% configuration %} host: description: IP Address of remote Raspberry Pi. required: true type: string ports: description: Array of used ports. required: true type: list keys: port: description: Port numbers and corresponding names (GPIO #). required: true type: [integer, string] invert_logic: description: If true, inverts the output logic to ACTIVE LOW. required: false default: false type: boolean {% endconfiguration %}
For more details about the GPIO layout, visit the Wikipedia article about the Raspberry Pi.
Note that a pin managed by HASS is expected to be exclusive to HASS.
A common question is what does port refer to, this number is the actual GPIO #, not the pin #. For example, if you have a relay connected to pin 11 its GPIO # is 17.
# Example configuration.yaml entry
switch:
- platform: remote_rpi_gpio
host: 192.168.0.123
ports:
17: Speaker Relay