home-assistant.io/source/_integrations/airgradient.markdown

title, description, ha_category, ha_config_flow, ha_release, ha_iot_class, ha_codeowners, ha_domain, ha_platforms, ha_integration_type, ha_zeroconf

title	description	ha_category	ha_config_flow	ha_release	ha_iot_class	ha_codeowners	ha_domain	ha_platforms	ha_integration_type	ha_zeroconf
AirGradient	Instructions on how to setup AirGradient devices in Home Assistant.	Health Sensor	true	2024.6	Local Polling	@airgradienthq @joostlek	airgradient	button number select sensor switch update	device	true

The AirGradient integration will fetch data from your AirGradient devices.

{% important %} In order for the device to be set up or discovered by Home Assistant, the firmware version should be at least 3.1.1. {% endimportant %}

{% include integrations/config_flow.md %}

Available sensors

The integration will fetch data from each device. The following sensors are supported:

• Carbon dioxide
• Humidity
• Nitrogen index
• PM0.3 count
• PM1 density
• PM2.5 density
• PM10 density
• Raw nitrogen
• Raw total volatile organic compounds
• Signal strength
• Temperature
• Total volatile organic compounds index

Available configuration entities

The integration provides a few configuration entities to customize the device experience. The settings are only available when the configuration source is set to local. The following entities are supported:

• Display temperature unit
• Display brightness
• LED bar brightness
• Requesting CO2 calibration
• Requesting LED bar test
• Toggling sharing metrics with AirGradient