home-assistant.io/source/_integrations/environment_canada.markdown

title, description, ha_category, ha_platforms, ha_release, ha_iot_class, ha_codeowners, ha_domain, ha_config_flow

title	description	ha_category	ha_platforms	ha_release	ha_iot_class	ha_codeowners	ha_domain	ha_config_flow
Environment Canada	Weather data from Environment Canada.	Weather Sensor Camera	camera sensor weather	0.95	Cloud Polling	@gwww @michaeldavie	environment_canada	true

The Environment Canada integration provides meteorological data for Canadian locations from Environment and Climate Change Canada.

{% include integrations/config_flow.md %}

Location Selection

The integration automatically determines the closest weather station based on the latitude and longitude specified. If integration-specific coordinates are not provided, the coordinates configured for Home Assistant are used.

You can also specify a weather station to use by providing a identification code of the form AB/s0000123, based on those listed in this CSV file.

Entities

The integration will create the entities listed below. Note that many of the entities are disabled by default and can be enabled via the Configuration / Entities screen.

Weather

• Current conditions and daily forecast
• Current conditions and hourly forecast

Camera

• Loop of radar imagery from the last 3 hours

By default, the radar entity uses the rain layer from 1 April to 30 November and the snow layer from 1 December to 31 March.

Sensors

Conditions and Forecasts

• Current condition
• Forecast summary
• Icon code of current condition
• Barometric pressure
• Pressure tendency
• Humidity
• Visibility
• UV index

Temperature

• Temperature
• Wind chill
• Humidex
• Forecast high temperature
• Forecast low temperature
• Dewpoint

Wind

• Wind speed
• Wind gust
• Wind direction
• Wind bearing

Precipitation

• Probability of precipitation
• Precipitation yesterday

Alerts

• Warnings
• Watches
• Advisories
• Statements
• Endings

The alert sensors use the number of current alerts as their state, with an attribute containing the title of each alert.

Template Sensors

The configuration snippet below adds a useful template sensors showing the current "feels like" temperature among air temperature, humidex, and wind chill.

Replace NAME with the name used to configure your integration.

{% raw %}

template:
  - sensor:
    - name: "Feels Like"
      device_class: temperature
      unit_of_measurement: "°C"
      state: >
        {% if not is_state('sensor.NAME_humidex', 'unknown') %}
          {{ states('sensor.NAME_humidex') }}
        {% elif not is_state('sensor.NAME_wind_chill', 'unknown') %}
          {{ states('sensor.NAME_wind_chill') }}
        {% else %}
          {{ states('sensor.NAME_temperature') | round(0) }}
        {% endif %}

{% endraw %}