mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-05-07 19:48:59 +00:00
38 lines
1.7 KiB
Markdown
38 lines
1.7 KiB
Markdown
---
|
|
layout: page
|
|
title: "KNX Thermostat"
|
|
description: "Instructions on how to integrate KXN thermostats with Home Assistant."
|
|
date: 2016-06-24 12:00
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: knx.png
|
|
ha_category: DIY
|
|
ha_release: 0.25
|
|
ha_iot_class: "Local Polling"
|
|
---
|
|
|
|
|
|
The `knx` climate platform is used as in interface with KNX thermostats.
|
|
|
|
KNX thermostats use at least 2 group addresses: one for the current temperature and one for the target temperature (named set-point in KNX terms).
|
|
|
|
To use your KNX thermostats in your installation, add the following to your `configuration.yaml` file:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
climate:
|
|
- platform: knx
|
|
address : KNX_ADDRESS
|
|
temperature_address: 0/1/1
|
|
setpoint_address: 0/1/0
|
|
```
|
|
|
|
- **address** (*Required*): The KNX group address that is used to turn on/off this actuator channel.
|
|
- **temperature_address** (*Required*): The group address that is used to communicate the current temperature. Data format must be datapoint type 9.001 DPT_Value_Temp (2-Octet float value), check [details](http://www.knx.org/fileadmin/template/documents/downloads_support_menu/KNX_tutor_seminar_page/Advanced_documentation/05_Interworking_E1209.pdf).
|
|
- **setpoint_address** (*Required*): The group address that is used to set/read the target temperature. Data format must be datapoint type 9.001 DPT_Value_Temp (2-Octet float value). Make sure, you set the read-flag for the thermostat to allow Home Assistant to read the target temperature.
|
|
- **name** (*Optional*): A name for this devices used within Home Assistant.
|
|
|
|
With the current version of the module, no advanced KNX thermostat functionalities (e.g. HVAC mode) are supported.
|