1.5 KiB
| title | description | ha_category | ha_release | ha_domain | ha_iot_class | ha_quality_scale | ha_codeowners | ha_integration_type | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Network configuration | Network configuration for Home Assistant |
|
2021.6 | network | Local Push | internal |
|
system |
The Network configuration {% term integration %} provides network configuration for integrations such as Zeroconf. It is managed by going to {% my network title="Settings > System > Network" %} and is only available to users that have "Advanced Mode" enabled on their {% my profile title="user profile" %}.
{% my general badge %}
Auto detection
Auto detection is based on the system routing next hop for the mDNS broadcast address (224.0.0.251).
If the next-hop has non-loopback, non-link-local, non-multicast addresses, auto detection will use the interface that corresponds to the next-hop (commonly referred to as the default interface).
If the next-hop cannot be detected or is a loopback address, auto detection will use all interfaces with non-loopback, non-link-local, non-multicast addresses.
Configuration
This integration is by default enabled, unless you've disabled or removed the default_config: line from your configuration. If that is the case, the following example shows you how to enable this integration manually:
Add the following section to your {% term "configuration.yaml" %} file:
# Example configuration.yaml entry
network: