home-assistant.io/source/_integrations/upnp.markdown

title, description, ha_category, ha_release, ha_iot_class, ha_config_flow, ha_codeowners, ha_domain, ha_ssdp, ha_platforms

title	description	ha_category	ha_release	ha_iot_class	ha_config_flow	ha_codeowners	ha_domain	ha_ssdp	ha_platforms
UPnP/IGD	Internet Gateway Device (IGD) Protocol for Home Assistant.	Network Binary Sensor Sensor	0.18	Local Polling	true	@StevenLooman @ehendrix23	upnp	true	binary_sensor sensor

The upnp integration enables you to collect network statistics from your router such as bytes in/out and packets in/out, uptime, WAN IP address, and WAN connectivity status. This information is provided by the UPnP/Internet Gateway Device (IGD) Protocol if enabled on your router.

There is currently support for the following device types within Home Assistant:

• Binary Sensor - If router is connected to the WAN.
• Sensor - Allows to get the network statistics from your router such as bytes in/out and packets in/out, uptime, status, and IP. Sensor for uptime will only be there if supported by the router.

Please note that UPnP or NAT-PMP needs to be enabled on your router for this integration to work.

{% include integrations/config_flow.md %}

Manual configuration

Alternatively, you can use YAML by adding the following section to your configuration.yaml file:

# Example configuration.yaml entry
upnp: