mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-06-03 08:46:49 +00:00
69 lines
1.8 KiB
Markdown
69 lines
1.8 KiB
Markdown
---
|
|
title: Big Ass Fans
|
|
description: Instructions on how to integrate BAF devices into Home Assistant.
|
|
ha_category:
|
|
- Binary sensor
|
|
- Climate
|
|
- Fan
|
|
- Light
|
|
- Number
|
|
- Sensor
|
|
- Switch
|
|
ha_zeroconf: true
|
|
ha_release: 2022.6
|
|
ha_iot_class: Local Push
|
|
ha_codeowners:
|
|
- '@bdraco'
|
|
- '@jfroy'
|
|
ha_domain: baf
|
|
ha_config_flow: true
|
|
ha_platforms:
|
|
- binary_sensor
|
|
- climate
|
|
- fan
|
|
- light
|
|
- number
|
|
- sensor
|
|
- switch
|
|
ha_integration_type: integration
|
|
---
|
|
|
|
Integrates [Big Ass Fans](https://www.bigassfans.com/) devices into Home Assistant.
|
|
|
|
## Supported devices
|
|
|
|
- Haiku Fans with 3.0 firmware and later (Legacy SenseME firmware not supported)
|
|
- Discontinued Haiku Lights with 3.0 firmware and later (Legacy SenseME firmware not supported)
|
|
- i6 Fans
|
|
|
|
## Platforms
|
|
|
|
### Binary sensor
|
|
|
|
For devices that support Auto Comfort and are running firmware 3.1 or later, an occupancy sensor {% term entity %} is available. The sensor has a hold time of about 5 minutes and pushes state updates.
|
|
|
|
### Climate
|
|
|
|
For devices that support Auto Comfort, a climate {% term entity %} allows adjusting the target temperature.
|
|
|
|
### Number
|
|
|
|
Adjusting the minimum and maximum speed for devices that support Auto Comfort is available.
|
|
|
|
Timeouts for returning to auto mode or turning back off after motion use a unit of seconds.
|
|
|
|
### Sensor
|
|
|
|
If the device supports it, the integration creates the following sensors, which receive push updates:
|
|
|
|
- Temperature
|
|
- Humidity
|
|
|
|
Additional diagnostic sensors are available, which generally do not receive push updates that need to be enabled in the UI if desired.
|
|
|
|
### Switch
|
|
|
|
The integration represents Whoosh mode as a switch for fans. When Whoosh is enabled, the fan will latch to the current speed and vary the speed from the latch point.
|
|
|
|
{% include integrations/config_flow.md %}
|