mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-05-11 13:38:59 +00:00
68 lines
2.2 KiB
Markdown
68 lines
2.2 KiB
Markdown
---
|
|
title: DROP
|
|
description: Instructions on how to integrate DROP into Home Assistant.
|
|
ha_category:
|
|
- Binary sensor
|
|
- Select
|
|
- Sensor
|
|
- Switch
|
|
ha_config_flow: true
|
|
ha_codeowners:
|
|
- '@ChandlerSystems'
|
|
- '@pfrazer'
|
|
ha_domain: drop_connect
|
|
ha_iot_class: Local Push
|
|
ha_mqtt: true
|
|
ha_release: '2024.1'
|
|
ha_platforms:
|
|
- binary_sensor
|
|
- select
|
|
- sensor
|
|
- switch
|
|
ha_integration_type: integration
|
|
---
|
|
|
|
The DROP integration provides connectivity with
|
|
[DROP smart water system](https://dropconnect.com) devices via a local MQTT API.
|
|
|
|
### Supported devices
|
|
|
|
There is currently support for the following DROP products within Home Assistant:
|
|
|
|
- **DROP Hub**: centralized system status and control.
|
|
- **Leak Detector**: reports detected leaks around the home.
|
|
- **Softener**: improves water quality by decreasing water hardness with integral water shutoff.
|
|
- **Filter**: improves water quality by removing contaminants with integral water shutoff.
|
|
- **Protection Valve**: automatic water shutoff with slow leak detection.
|
|
- **Pump Controller**: smart replacement for an FSG pressure switch.
|
|
- **RO Filter**: reverse osmosis drinking water filtration.
|
|
- **Salt Sensor**: alerts when the salt level in the softener brine tank is low.
|
|
|
|
### Pre-requisites
|
|
|
|
To use DROP with Home Assistant, you must have already configured the [MQTT](/integrations/mqtt/) platform.
|
|
|
|
To enable the DROP integration, use the DROP Connect app to connect your DROP Hub to your MQTT broker:
|
|
|
|
- Start the DROP Connect app and connect to your DROP Hub.
|
|
- In the **Hub Network Settings** section on the **System > Advanced** page, tap the **Configure MQTT** button.
|
|
- Enter the MQTT broker address, port number, username, and password.
|
|
- Click **Connect** and confirm that the DROP Hub has connected to the MQTT broker.
|
|
|
|
Once the DROP Hub is connected to your MQTT broker, the devices on your DROP system should be discovered by Home
|
|
Assistant.
|
|
|
|
{% details "Manual configuration steps" %}
|
|
|
|
- Browse to your Home Assistant instance.
|
|
- Go to **{% my integrations title="Settings > Devices & Services" %}**.
|
|
- Set up the new discovered devices.
|
|
|
|
{% enddetails %}
|
|
|
|
<div class="note">
|
|
|
|
The MQTT broker address and port used for the DROP Hub must be the same as configured for the Home Assistant MQTT integration.
|
|
|
|
</div>
|