jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-05-10 13:09:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
home-assistant.io/source/_integrations/starlink.markdown
c0ffeeca7 8c7ef7a2c0
s-t integrations: apply sentence-style caps to categories (#29906) 
* s-t integrations: apply sentence-style caps to categories

* Apply suggestions from code review

Co-authored-by: Joakim Sørensen <joasoe@gmail.com>

* Apply suggestions from code review

Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>

---------

Co-authored-by: Joakim Sørensen <joasoe@gmail.com>
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
2023-11-19 13:23:59 +01:00

2.5 KiB
Raw Blame History

title, description, ha_category, ha_release, ha_iot_class, ha_config_flow, ha_codeowners, ha_domain, ha_platforms, ha_integration_type, ha_quality_scale
title description ha_category ha_release ha_iot_class ha_config_flow ha_codeowners ha_domain ha_platforms ha_integration_type ha_quality_scale
Starlink Instructions on how to integrate Starlink into Home Assistant.
Binary sensor
Button
Device tracker
Network
Sensor
Switch
2023.2 Local Polling true
@boswelja
starlink
binary_sensor
button
device_tracker
diagnostics
sensor
switch
integration silver

The Starlink integration allows you to integrate your Starlink into Home Assistant.

Important: If your Starlink is in bypass mode, you will need to open a route to it so that the local API can be accessed. Otherwise this integration will not work.

{% include integrations/config_flow.md %}

Sensor

  • Ping - The ping that Starlink has measured, in ms
  • Ping drop rate - The percentage of failed ping requests (aka "dropped"). This is the inverse of "Uptime" in the Starlink app.
  • Azimuth - The direction Dishy is facing in degrees
  • Elevation - Dishy's current elevation in degrees
  • Uplink throughput - The amount of data being uploaded through Starlink
  • Downlink throughput - The amount of data being downloaded through Starlink
  • Last boot time - The time Starlink was last turned on

Binary sensor

  • Update available - Whether there is an update pending install
  • Obstructed - Whether Dishy is currently obstructed
  • Roaming mode - Whether Starlink is "roaming". Roaming is an optional upgrade that allows you to use your Starlink outside of your home address. It is also known as "portability mode"
  • Heating - Whether Dishy is currently heating. This may be due to cold temperatures, or an attempt to thaw snow and ice
  • Idle - Whether Starlink is "sleeping", as per the schedule defined in the Starlink app
  • Mast near vertical - Whether Dishy is mounted straight
  • Motors stuck - Whether Dishy is unable to move
  • Slow ethernet - Whether the Ethernet link is at max (gigabit) speed
  • Thermal throttle - Whether Starlink has reduced performance to avoid overheating
  • Unexpected location - Whether Starlink has detected operation outside of its designated area

Button

  • Reboot - Reboots your Starlink system

Switch

  • Stowed - Controls whether Dishy is stowed

Device tracker

  • Device location - Tracks the location of Dishy. Note you need to allow location access on the local network via the Starlink app for this to work. This is disabled by default in the Starlink app and is thus disabled by default in Home Assistant.