mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-05-09 04:29:03 +00:00
68 lines
2.3 KiB
Markdown
68 lines
2.3 KiB
Markdown
---
|
|
title: V2C
|
|
description: Instructions on how to integrate V2C Trydan EVSE with Home Assistant.
|
|
ha_category:
|
|
- Car
|
|
ha_release: '2023.12'
|
|
ha_iot_class: Local Polling
|
|
ha_config_flow: true
|
|
ha_codeowners:
|
|
- '@dgomes'
|
|
ha_domain: v2c
|
|
ha_platforms:
|
|
- binary_sensor
|
|
- number
|
|
- sensor
|
|
- switch
|
|
ha_integration_type: integration
|
|
---
|
|
|
|
The V2C integration allows monitoring and control of a local [V2C](https://v2charge.com/trydan/) Trydan EVSE in Home Assistant.
|
|
|
|
There is currently support for the following platforms within Home Assistant:
|
|
|
|
- [Sensor](#sensor)
|
|
- [Binary sensor](#binary-sensor)
|
|
- [Number](#number)
|
|
- [Switch](#switch)
|
|
|
|
## Prerequisites
|
|
|
|
To configure the V2C integration you will need to enter the IP address of your Trydan EVSE.
|
|
|
|
{% include integrations/config_flow.md %}
|
|
|
|
## Binary Sensor
|
|
|
|
The V2C integration currently exposes the following binary sensors:
|
|
|
|
- connected: indicates if the EVSE is connected to the car
|
|
- charging: indicates an ongoing charging session
|
|
- ready: indicates you may disconnect from the car
|
|
|
|
## Sensor
|
|
|
|
The V2C integration currently exposes the following sensors:
|
|
|
|
- charge_power: Current power charging your vehicle.
|
|
- charge_energy: Energy transferred to your car during the current charging session.
|
|
- charge_time: Time spent in the current charging session.
|
|
- house_power: Power consumed by your household. This data is available if you installed and configured the settings in the V2C app for the <abbr title="current transformer">CT</abbr> clamp that was supplied with your <abbr title="electric vehicle supply equipment">EVSE</abbr>).
|
|
- fv_power: Power produced by your photovoltaic system. This data is available if you installed and configured the settings in the V2C app for the <abbr title="current transformer">CT</abbr> clamp that was supplied with your <abbr title="electric vehicle supply equipment">EVSE</abbr>).
|
|
|
|
## Number
|
|
|
|
The V2C integration currently exposes the following number entity:
|
|
|
|
- intensity: current used to charge your vehicle
|
|
|
|
## Switch
|
|
|
|
The V2C integration currently exposes the following switches:
|
|
|
|
- pause session: pause the charging session
|
|
- lock EVSE: disables the EVSE
|
|
- charge point timer: only allow charging during predefined period (set on the mobile application)
|
|
- dynamic intensity modulation: enable dynamic intensity modulation
|
|
- pause dynamic control modulation: paused the dynamic control modulation
|