home-assistant.io/source/_integrations/waterfurnace.markdown

title, description, ha_category, ha_release, ha_iot_class, ha_domain, ha_platforms, ha_integration_type

title	description	ha_category	ha_release	ha_iot_class	ha_domain	ha_platforms	ha_integration_type
WaterFurnace	Instructions on how to integrate WaterFurnace Geothermal System into Home Assistant.	Sensor	0.62	Cloud Polling	waterfurnace	sensor	integration

The WaterFurnace {% term integration %} communicates with the WaterFurnace Symphony website's WebSocket to show you many of the sensors in your system. While not an official API, this is the same backend the Symphony website is based on, and should be reasonably stable.

The sensors provided include:

• Thermostat Setpoint
• Thermostat Current Temp
• Leaving Air Temp
• Entering Water Loop Temp
• Current Humidity
• Current Humidity Setpoint
• Total system power (in Watts)
• Furnace Mode
• Compressor Power
• Fan Power
• Aux Power
• Loop Pump Power
• Compressor Speed
• Fan Speed

Configuration

To use Waterfurnace in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
waterfurnace:
  username: YOUR_USERNAME
  password: YOUR_PASSWORD

{% configuration %} username: description: The email address for your Symphony WaterFurnace account required: true type: string password: description: The password for your Symphony WaterFurnace account required: true type: string {% endconfiguration %}

Limitations

The WebSocket interface used by this module requires active polling to prevent the server side shuts down the connection. By default, this polling is happening every 10 seconds. All sensors are updated during every polling cycle.

While this is communicating with a thermostat, geothermal systems operate most efficiently when setbacks are not used, and the home is kept at a constant temperature. It remains useful to collect the data from the system to understand its performance, but a full climate interface won't be implemented.