mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-18 23:06:58 +00:00
95 lines
2.3 KiB
Markdown
95 lines
2.3 KiB
Markdown
---
|
|
layout: page
|
|
title: APCUPSd Sensor
|
|
description: "Instructions on how to set up APCUPSd sensors within Home Assistant."
|
|
date: 2016-02-10 18:28
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: apcupsd.png
|
|
ha_category: Sensor
|
|
---
|
|
|
|
Any of the lines of output from the [apcaccess](http://linux.die.net/man/8/apcaccess) command can be used as a sensor device in Home Assistant. In order to create a sensor for a value, create an entity within a `sensor` section of your configuration. The following parameters may be used:
|
|
|
|
- **name** (*Required*): The name you'd like to give the sensor in Home Assistant.
|
|
- **platform** (*Required*): Set to `apcupsd`.
|
|
- **type** (*Required*): The label for the value you'd like to track based on the output of `apcaccess`. Refer to the examples for ideas.
|
|
|
|
#### Example
|
|
|
|
Given the following output from `apcaccess`:
|
|
|
|
```yaml
|
|
APC : 001,051,1149
|
|
DATE : 2016-02-09 17:13:31 +0000
|
|
HOSTNAME : localhost
|
|
VERSION : 3.14.12 (29 March 2014) redhat
|
|
UPSNAME : netrack
|
|
CABLE : Custom Cable Smart
|
|
DRIVER : APC Smart UPS (any)
|
|
UPSMODE : Stand Alone
|
|
STARTTIME: 2016-02-09 16:06:47 +0000
|
|
MODEL : SMART-UPS 1400
|
|
STATUS : TRIM ONLINE
|
|
LINEV : 247.0 Volts
|
|
LOADPCT : 13.0 Percent
|
|
BCHARGE : 100.0 Percent
|
|
TIMELEFT : 104.0 Minutes
|
|
MBATTCHG : 5 Percent
|
|
MINTIMEL : 3 Minutes
|
|
MAXTIME : 0 Seconds
|
|
MAXLINEV : 249.6 Volts
|
|
MINLINEV : 244.4 Volts
|
|
OUTPUTV : 218.4 Volts
|
|
SENSE : High
|
|
DWAKE : 0 Seconds
|
|
DSHUTD : 180 Seconds
|
|
DLOWBATT : 2 Minutes
|
|
LOTRANS : 196.0 Volts
|
|
HITRANS : 253.0 Volts
|
|
RETPCT : 15.0 Percent
|
|
ITEMP : 30.6 C
|
|
ALARMDEL : Low Battery
|
|
BATTV : 27.6 Volts
|
|
LINEFREQ : 50.0 Hz
|
|
LASTXFER : High line voltage
|
|
NUMXFERS : 0
|
|
TONBATT : 0 Seconds
|
|
CUMONBATT: 0 Seconds
|
|
XOFFBATT : N/A
|
|
SELFTEST : NO
|
|
STESTI : 336
|
|
STATFLAG : 0x0500000A
|
|
DIPSW : 0x00
|
|
REG1 : 0x00
|
|
REG2 : 0x00
|
|
REG3 : 0x00
|
|
MANDATE : 07/13/99
|
|
SERIALNO : GS9888761008
|
|
BATTDATE : 13/11/15
|
|
NOMOUTV : 230 Volts
|
|
NOMBATTV : 24.0 Volts
|
|
EXTBATTS : 0
|
|
FIRMWARE : 70.11.I
|
|
END APC : 2016-02-09 17:13:46 +0000
|
|
```
|
|
|
|
Use the (case insensitive) values from the left hand column as your `type`:
|
|
|
|
```yaml
|
|
sensor:
|
|
- name: Mains Voltage
|
|
platform: apcupsd
|
|
type: linev
|
|
|
|
- name: UPS Load
|
|
platform: apcupsd
|
|
type: loadpct
|
|
|
|
- name: UPS Temperature
|
|
platform: apcupsd
|
|
type: itemp
|
|
```
|