home-assistant.io/source/_integrations/jvc_projector.markdown
Steve Easley 7bb9c1f00a
Add note about newer JVC models requiring a password (#34897)
* Add note about newer JVC models requiring a password

* Adjusted wording

* Update source/_integrations/jvc_projector.markdown

Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>

* Change wording to include more models

---------

Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
2024-09-24 17:11:56 +02:00

2.1 KiB

title, description, ha_category, ha_release, ha_iot_class, ha_config_flow, ha_codeowners, ha_domain, ha_platforms, ha_integration_type
title description ha_category ha_release ha_iot_class ha_config_flow ha_codeowners ha_domain ha_platforms ha_integration_type
JVC Projector Instructions on how to integrate JVC Projector into Home Assistant.
Remote
2023.6 Local Polling true
@SteveEasley
@msavazzi
jvc_projector
binary_sensor
remote
select
sensor
device

The JVC Projector integration allows for the automation of JVC Projectors.

Supported models

This integration is intended for the automation of any modern JVC Projector with a network port.

Prerequisites

JVC is requiring newer 2024+ models to use a user-generated password to access the network port for security reasons.

To set up these models:

  1. Set a password on the projector's network setup page.
  2. Use this password when adding the JVC Projector integration in Home Assistant.

{% include integrations/config_flow.md %}

Remote

The JVC Projector remote platform will create a Remote entity for the device. This entity allows you to send the following commands via the remote.send_command action.

  • menu
  • up
  • down
  • left
  • right
  • ok
  • back
  • info
  • input
  • hide
  • mpc
  • cmd
  • advanced_menu
  • picture_mode
  • color_profile
  • lens_control
  • setting_memory
  • gamma_settings
  • hdmi_1
  • hdmi_2
  • mode_1
  • mode_2
  • mode_3
  • lens_ap
  • gamma
  • color_temp
  • natural
  • cinema
  • anamo
  • 3d_format

Binary sensor

The following sensor types are supported:

  • Power on is True when projector is in status "on", "warming"

Sensor

Introduces two sensors to detect Power Status and HDMI Input.

Detailed Power Status values:

  • standby
  • on
  • warming
  • cooling
  • error

Please note that if the projector is off, it will not respond to remote polling and will show as unavailable.

Detailed HDMI Input values:

  • hdmi1
  • hdmi2

Selects

The following Select entities are added. They allow changing the device state from a list of options.

  • input