mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-06-03 00:36:50 +00:00
68 lines
2.5 KiB
Markdown
68 lines
2.5 KiB
Markdown
---
|
|
layout: page
|
|
title: "KNX Climate"
|
|
description: "Instructions on how to integrate KNX thermostats with Home Assistant."
|
|
date: 2016-06-24 12:00
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: knx.png
|
|
ha_category: Climate
|
|
ha_release: 0.25
|
|
ha_iot_class: "Local Polling"
|
|
---
|
|
|
|
|
|
The `knx` climate platform is used as in interface with KNX thermostats.
|
|
|
|
The `knx` component must be configured correctly, see [KNX Component](/components/knx).
|
|
|
|
To use your KNX thermostats in your installation, add the following lines to your `configuration.yaml` file:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
climate:
|
|
- platform: knx
|
|
name: HASS-Kitchen.Temperature
|
|
temperature_address: '6/2/1'
|
|
setpoint_address: '5/1/2'
|
|
target_temperature_address: '5/1/1'
|
|
operation_mode_address: '5/1/3'
|
|
```
|
|
|
|
Alternatively, if your device has dedicated binary group addresses for frost/night/comfort mode:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
climate:
|
|
- platform: knx
|
|
name: HASS-Kitchen.Temperature
|
|
temperature_address: '6/2/1'
|
|
setpoint_address: '5/1/2'
|
|
target_temperature_address: '5/1/1'
|
|
operation_mode_frost_protection_address: '5/1/3'
|
|
operation_mode_night_address: '5/1/4'
|
|
operation_mode_comfort_address: '5/1/5'
|
|
```
|
|
|
|
Configuration variables:
|
|
|
|
- **name** (*Optional*): A name for this device used within Home Assistant.
|
|
- **temperature_address**: KNX group address for reading current room temperature from KNX bus.
|
|
- **target_temperature_address**: KNX group address for reading current target temperature from KNX bus.
|
|
- **setpoint_address**: KNX group address for basis setpoint
|
|
|
|
- **operation_mode_address** (*Optional*): KNX address for operation mode (Frost protection/night/comfort).
|
|
- **operation_mode_state_address** (*Optional*): Explicit KNX address for reading operation mode
|
|
- **controller_status_address** (*Optional*): KNX address for HVAC controller status (in accordance with KNX AN 097/07 rev 3)
|
|
- **controller_status_state_address** (*Optional*): Explicit KNX address for reading HVAC controller status
|
|
|
|
- **operation_mode_frost_protection_address** (*Optional*): KNX address for switching on/off frost/heat protection mode.
|
|
- **operation_mode_night_address** (*Optional*): KNX address for switching on/off night mode.
|
|
- **operation_mode_comfort_address** (*Optional*): KNX address for switching on/off comfort mode.
|
|
|
|
`operation_mode_frost_protection_address` / `operation_mode_night_address` / `operation_mode_comfort_address` are not necessary if `operation_mode_address` was specified.
|
|
|
|
|