home-assistant.io/media_player.yamaha.markdown at a89804ff8e17b542919ba31c7c851de8d23df2ac

mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-07-23 01:06:52 +00:00

Matt N 2b5d3c0c10 Fix over 100 typos/spelling mistakes :P (#1483 )

* Fix a bunch of typos/spelling mistakes
* Removed extra spaces from emulated_hue
* Correct device type. of binary_sensor.enocean.markdown

2016-11-23 10:23:23 +01:00

2.2 KiB

Raw Blame History

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category	ha_release
page	Yamaha Network Receivers	Instructions how to integrate Yamaha Network Receivers into Home Assistant.	2016-03-26 0:58 -0700	true	false	true	true	yamaha.png	Media Player	0.16

The yamaha platform allows you to control Yamaha Network Receivers from Home Assistant.

Supported devices:

HTR-4065
RX-V473
RX-V573
RX-V673
RX-V773
And more

To add a Yamaha Network Receiver to your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
media_player:
  - platform: yamaha

Configuration variables:

name (Optional): Name of the device
host (Optional): IP address or hostname of the device
source_ignore (Optional): List of sources to hide in the front-end
source_names (Optional): Mapping of internal AVR source names to custom ones, allowing to rename e.g. HDMI1 to ChromeCast

A few notes:

Not specifying the host variable will result in automatically searching your network for Yamaha Receivers. It will add a media player device for each one.
For receivers that support more than one zone, Home Assistant will add one media player per zone supported by the player, named "$name Zone 2" and "$name Zone 3".
In some cases, autodiscovery fails due to a known bug in the receiver's firmware. It is possible to manually specify the receiver's IP address or via it's hostname (if it is discoverably by your DNS) then.
Please note: If adding the IP address or hostname manually, you must enable network standby on your receiver, or else startup of Home Assistant will hang if you have your receiver switched off.
Currently, this component supports powering on/off, mute, volume control and source selection. Playback controls, for instance play and stop are available for sources that supports it.

A full configuration example will look like the sample below:

# Example configuration.yaml entry
media_player:
  - platform: yamaha
    host: 192.168.0.10
    source_ignore:
      - "AUX"
      - "HDMI6"
    source_names:
      HDMI1: "ChromeCast"
      AV4: "Vinyl"

2.2 KiB Raw Blame History

2.2 KiB

Raw Blame History