mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-05-28 13:57:04 +00:00
121 lines
4.1 KiB
Markdown
121 lines
4.1 KiB
Markdown
---
|
|
layout: page
|
|
title: "Satel Integra Alarm"
|
|
description: "Instructions on how to integrate a Satel Integra alarm panel with Home Assistant using an ETHM network extension from Satel."
|
|
date: 2017-09-07 13:28
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: satel.jpg
|
|
ha_category: Hub
|
|
ha_release: 0.54
|
|
ha_iot_class: "Local Push"
|
|
---
|
|
|
|
The `satel_integra` component will allow Home Assistant users who own a Satel Integra alarm panel to leverage their alarm system and its sensors to provide Home Assistant with information about their homes. Connectivity between Home Assistant and the alarm is accomplished through a ETHM extension module that must be installed in the alarm. Compatible with ETHM-1 Plus module with firmware version > 2.00 (version 2.04 confirmed).
|
|
|
|
There is currently support for the following device types within Home Assistant:
|
|
|
|
- [Binary Sensor](/components/binary_sensor.satel_integra/): Reports on zone statuses
|
|
- [Alarm Control Panel](/components/alarm_control_panel.satel_integra/): Reports on alarm status, and can be used to arm/disarm the system
|
|
|
|
The module communicates via Satel's open TCP protocol published on their website. It subscribes for new events coming from alarm system and reacts to them immediately.
|
|
|
|
## {% linkable_title Setup %}
|
|
|
|
The library currently doesn't support encrypted connection to your alarm, so you need **to turn off encryption for integration protocol**. In Polish: "koduj integracje" must be unchecked. You will find this setting in your DloadX program.
|
|
|
|
A list of all zone IDs can be taken from DloadX program.
|
|
|
|
For more information on the available zone types, take a look at the [Binary Sensor](/components/binary_sensor.alarmdecoder/) documentation. Note: If no zones are specified, Home Assistant will not load any binary_sensor components."
|
|
|
|
## {% linkable_title Configuration %}
|
|
|
|
A `satel_integra` section must be present in the `configuration.yaml` file:
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
satel_integra:
|
|
host: IP_ADDRESS
|
|
```
|
|
|
|
{% configuration %}
|
|
host:
|
|
description: The IP address of the Satel Integra ETHM module on your home network, if using socket type.
|
|
required: true
|
|
default: localhost
|
|
type: string
|
|
port:
|
|
description: The port on which the ETHM module listens for clients using integration protocol.
|
|
required: false
|
|
default: 7094
|
|
type: integer
|
|
partition:
|
|
description: The partition to operate on. Integra can support multiple partitions, this platform only supports one.
|
|
required: false
|
|
default: 1
|
|
type: integer
|
|
arm_home_mode:
|
|
description: The mode in which arm Satel Integra when 'arm home' is used. Possible options are `1`,`2` or `3`. For more information on what are the differences between them, please refer to Satel Integra manual.
|
|
required: false
|
|
default: 1
|
|
type: integer
|
|
zones:
|
|
description: "This module does not discover currently which zones are actually in use, so it will only monitor the ones defined in the configuration. For each zone, a proper ID must be given as well as its name (does not need to match the one specified in Satel Integra alarm)."
|
|
required: false
|
|
type: [integer, list]
|
|
keys:
|
|
name:
|
|
description: Name of the zone.
|
|
required: true
|
|
type: string
|
|
type:
|
|
description: The zone type.
|
|
required: false
|
|
default: motion
|
|
type: string
|
|
{% endconfiguration %}
|
|
|
|
|
|
## {% linkable_title Full examples %}
|
|
|
|
|
|
```yaml
|
|
# Example configuration.yaml entry
|
|
satel_integra:
|
|
host: 192.168.1.100
|
|
port: 7094
|
|
partition: 1
|
|
arm_home_mode: 1
|
|
zones:
|
|
01:
|
|
name: 'Bedroom'
|
|
type: 'motion'
|
|
02:
|
|
name: 'Hall'
|
|
type: 'motion'
|
|
30:
|
|
name: 'Kitchen - smoke'
|
|
type: 'smoke'
|
|
113:
|
|
name: 'Entry door'
|
|
type: 'opening'
|
|
```
|
|
|
|
Having configured the zones, you can use them for automation, such as to react on the movement in your bedroom.
|
|
For example:
|
|
|
|
```yaml
|
|
alias: Flick the input switch when movement in bedroom detected
|
|
trigger:
|
|
platform: state
|
|
entity_id: 'binary_sensor.bedroom'
|
|
to: 'on'
|
|
action:
|
|
service: input_boolean.turn_on
|
|
data:
|
|
entity_id: input_boolean.movement_detected
|
|
```
|
|
|