622522097b
Added an Epson W39 as a tested projector. No problems with installing an dusing this integration with the W39.
1.8 KiB
| title | description | ha_category | ha_release | ha_iot_class | ha_domain | ha_codeowners | ha_config_flow | ha_platforms | ha_integration_type | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Epson | Instructions on how to integrate Epson projector into Home Assistant. |
|
0.72 | Local Polling | epson |
|
true |
|
integration |
The Epson {% term integration %} allows you to control a Epson projector from Home Assistant. The device has to be turned on during initial configuration. When you want to add a device for the first time, turn it on before following the integration steps.
{% include integrations/config_flow.md %}
Supported features
- turn on/off
- set input
- set/get color mode including high/low lamp
- increase/decrease volume
- mute/unmute audio
- send next/previous track
Supported devices
- Epson projectors supporting ESC/VP21 protocol.
Tested devices
- Epson EH-TW5350
- Epson EH-TW7000
- Epson EH-TW9400W (shares platform with 7400/8400/9400(w))
- Epson EH-TW3200
- Epson Powerlite W39
Configuration
This integration supports connecting to an Epson projector via LAN or Serial.
LAN connection
Connect the projector to your LAN and enter the IP address of the projector when prompted, selecting either HTTP or TCP depending on what the projector model supports. The iProjection app by Epson can be used to test if it is working.
Serial connection
Connect projector directly to Home Assistant via a serial cable, or ser2net can be used as a Serial to network proxy.
ser2net configuration
A ser2net configuration similar to below can be used to expose the projector connected to /dev/ttyUSB0 on port 3629.
connection: &con1
accepter: tcp,3629
connector: serialdev,/dev/ttyUSB0,9600n81
Then the projector can be added to the integration using socket://<ser2net_ip>:3629.