home-assistant.io/source/_integrations/gpsd.markdown

title	description	ha_category	ha_release	ha_config_flow	ha_iot_class	ha_codeowners	ha_domain	ha_platforms	ha_integration_type
GPSD	Instructions on how to integrate GPSD into Home Assistant.	Utility	0.26	true	Local Polling	@fabaff @jrieger	gpsd	sensor	integration

The gpsd integration is using the GPS information collected by gpsd and a GPS receiver.

Setup

A requirement is that gpsd is installed ($ sudo apt-get install gpsd or $ sudo dnf -y install gpsd). gpsd uses the socket activation feature of systemd on recent Linux distributions for USB receivers. This means that if you plug your GPS receiver in, gpsd is started. Other GPS device may work too, but this was not tested.

$ sudo systemctl status gpsdctl@ttyUSB0.service
● gpsdctl@ttyUSB0.service - Manage ttyUSB0 for GPS daemon
   Loaded: loaded (/usr/lib/systemd/system/gpsdctl@.service; static; vendor preset: disabled)
   Active: active (exited) since Sat 2016-07-16 09:30:33 CEST; 1 day 23h ago
  Process: 5303 ExecStart=/bin/sh -c [ "$USBAUTO" = true ] && /usr/sbin/gpsdctl add /dev/%I || : (code=exited, status=0/SUCCESS)
 Main PID: 5303 (code=exited, status=0/SUCCESS)

Jul 16 09:30:33 laptop019 systemd[1]: Starting Manage ttyUSB0 for GPS daemon...
Jul 16 09:30:33 laptop019 gpsdctl[5305]: gpsd_control(action=add, arg=/dev/ttyUSB0)
Jul 16 09:30:33 laptop019 gpsdctl[5305]: reached a running gpsd

To check if your setup is working, connect to port 2947 on the host where gpsd is running with telnet. This may need adjustments to your firewall.

$ telnet localhost 2947
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
{"class":"VERSION","release":"3.15","rev":"3.15-2.fc23","proto_major":3,"proto_minor":11}

{% include integrations/config_flow.md %}