jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-05-08 12:08:58 +00:00
Code Issues Packages Projects Releases Wiki Activity
home-assistant.io/source/_components/switch.bbb_gpio.markdown
Fabian Affolter 37cbd07f1b Beaglebone Black GPIO docs (#1765) 
* Fix typo

* Add initial docs for Beaglebone Black

* Fix name
2017-01-14 18:56:05 +01:00

1.3 KiB
Raw Blame History

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release
layout title description date sidebar comments sharing footer logo ha_category ha_release
page BeagleBone Black GPIO Switch Instructions how to integrate the GPIO of a BeagleBone Black into Home Assistant as a switch. 2017-01-14 10:00 true false true true beaglebone-black.png Switch 0.36

The bbb_gpio switch platform allows you to control the GPIOs of your BeagleBone Black.

To use yourBeagleBone Black's GPIO in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
switch:
 - platform: bbb_gpio
   pins:
     GPIO0_7:
       name: LED Red
     P9_12:
       name: LED Green
       initial: true
       invert_logic: true

Configuration variables:

  • pins array (Required): Array of used ports.
    • pin_name (Required): Port numbers and corresponding names.
      • name (Optional): Friendly name to use for the frontend.
      • initial (Optional): Initial state of the pin. Defaults to False.
      • invert_logic (Optional): If true, inverts the output logic to ACTIVE LOW. Default is false (ACTIVE HIGH).

For more details about the GPIO layout, visit the article about the BeagleBone Black.