mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-05-08 12:08:58 +00:00
bbf9a79623
* Update with `repeats` config variable
See https://github.com/home-assistant/home-assistant/issues/5069
* Use `signal_repetitions` instead of `repeats`
As recommended [in PR review](f068781b4e).
1.8 KiB
1.8 KiB
layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release
| layout | title | description | date | sidebar | comments | sharing | footer | logo | ha_category | ha_release |
|---|---|---|---|---|---|---|---|---|---|---|
| page | Raspberry Pi RF Switch | Instructions how to integrate devices controlled via codes sent with low-cost GPIO RF modules on a Raspberry Pi into Home Assistant as a switch. | 2016-05-10 09:00 | true | false | true | true | raspberry-pi.png | Switch | 0.19 |
The rpi_rf switch platform allows you to control devices over 433/315MHz LPD/SRD signals with generic low-cost GPIO RF modules on a Raspberry Pi.
Interoperable with codes sniffed via the rpi-rf module or rc-switch. For more info see the PyPi module description: rpi-rf.
To enable, add the following to your configuration.yaml:
# Example configuration.yaml entry
switch:
platform: rpi_rf
gpio: 17
switches:
bedroom_light:
code_on: 1234567
code_off: 1234568
ambilight:
pulselength: 200
code_on: 987654
code_off: 133742
living_room_light:
protocol: 5
code_on: 654321
code_off: 654320
signal_repetitions: 15
Configuration variables:
- gpio (Required): GPIO to which the data line of the TX module is connected.
- switches: (Required): The array that contains all switches.
- [entry] (Required): Name of the switch. Multiple entries are possible.
- code_on (Required): Decimal code to switch the device on.
- code_off (Required): Decimal code to switch the device off.
- protocol (Optional): RF Protocol (Default is
1). - pulselength (Optional): Pulselength (Default is the protocol default).
- signal_repetitions (Optional): Number of times to repeat transmission (default is 10, can increase to try to improve reliability).
- [entry] (Required): Name of the switch. Multiple entries are possible.