home-assistant.io/source/_components/binary_sensor.pilight.markdown

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release, ha_iot_class

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category	ha_release	ha_iot_class
page	Pilight Binary Sensor	Instructions how to integrate pilight binary sensors within Home Assistant.	2017-03-24 20:41	true	false	true	true	pilight.png	Binary Sensor	0.44	Local Polling

This component implement the pilight hub binary sensor functionality. Two type of pilight binary sensor configuration available. A normal sensor which send the on and off state cyclical and a trigger sensor which send only a trigger when an event happend (for example lots of cheap PIR motion detector) (see example configuration below).

# Example configuration.yml entry
binary_sensor:
  - platform: pilight
    variable: 'state'

Configuration variables:

• variable (Required): The variable name in the data stream that defines the sensor value.
• payload (Required): Message payload identifiers. Only if all identifiers are matched the sensor value is set.
• name (Optional): Name of the sensor.
• payload_on (Optional): Variable on value. The component will recognize this as logical '1'.
• payload_off (Optional): Variable off value. The component will recognize this as logical '0'.
• disarm_after_trigger: (Optional): Configure sensor as trigger type.
• reset_delay_sec (Optional): Seconds before the sensor is disarmed if disarm_after_trigger is set to true. Default is 30 seconds.

A full configuration example could look like this:

# Example configuration.yml entry
binary_sensor:
  - platform: pilight
    name: 'Motion'
    variable: 'state'
    payload:
      unitcode: 371399
    payload_on: 'closed'
    disarm_after_trigger: True
    reset_delay_sec: 30