home-assistant.io/source/_integrations/dynalite.markdown

title, description, logo, ha_category, ha_iot_class, ha_release, ha_codeowners, ha_config_flow

title	description	logo	ha_category	ha_iot_class	ha_release	ha_codeowners	ha_config_flow
Philips Dynalite	Instructions on setting up Philips Dynalite within Home Assistant.	dynalite.png	Hub Light	Local Push	0.106	@ziv1234	true

Philips Dynalite support is integrated into Home Assistant as a hub that can drive the light platforms.

There is currently support for the following device types within Home Assistant:

• Lights

A Philips Dynalite hub connects to the Dynet network, which is composed of areas, channels, and preset.

A Dynalite area typically (although not necessarily) defines some physical area, such as a room.

Each area can have one or more channels that correspond to the different devices they control. A channel can relate to a dimmable light, or other devices, such as a cover.

Additionally, each area can have one or more presets that determine the behavior of all the channels, and sometimes trigger additional actions. Typically, preset 1 in an area means 'on', and preset '4' means off. Additional presets could be used for scenes and dimming.

Configuration

Since Philips Dynalite has virtually no auto-discover capabilities, it needs to be configured via the configuration.yaml file:

# Example configuration.yaml entry
dynalite:
  bridges:
    - host: DEVICE_IP_ADDRESS

{% configuration %} host: description: The IP address of the bridge (e.g., 192.168.1.10). required: true type: string port: description: Port number of the bridge. required: false type: integer default: 12345 name: description: Name for the bridge. required: false type: string default: dynalite active: description: Actively query network. When starting, it will query all devices for their current status, and also will send queries when some changes are in progress (e.g., lights dimming or covers moving). Better experience but creates more load on the Dynalite network. required: false type: boolean default: false polltimer: description: Polling interval for devices in transition. Value in seconds. When devices are in transition (e.g., a light fading), it will ask for a new state every X seconds until it is at the target level. Only relevant when active is set. required: false type: float default: 1.0 autodiscover: description: Enable auto-discover. As Dynalite does not support autodiscovery, this tracks event on your network, so if you turn on a light, it will be added to Home Assistant. required: false type: boolean default: false default: description: Global defaults for the system required: false type: map keys: fade: description: Default fade required: false type: float area: description: Definition for the various Dynalite areas. required: true type: map keys: 'AREA_NUMBER': description: The Dynalite area number, 1-255. required: true type: map keys: name: description: Name of the area. required: true type: string fade: description: Fade time for the area, in seconds. required: false type: float default: 2.0 channel: description: Map of the channels in this area. required: false type: map keys: 'CHANNEL_NUMBER': description: The Dynalite channel number in the area, 1-255. required: true type: map keys: name: description: Name of the channel. required: false type: string default: "AREA_NAME Channel CHANNEL_NUMBER" fade: description: Fade time for the channel, in seconds. required: false type: float default: 2.0 {% endconfiguration %}

Examples

# Example configuration.yaml entry specifying optional parameters
dynalite:
  bridges:
    - host: DEVICE_IP_ADDRESS
      port: 12345
      autodiscover: true
      polltimer: 1
      areacreate: auto
      log_level: debug
      area:
        '2':
          name: Living Room
          channel:
            '2': 
              name: Entrance Spot
              fade: 10.0
            '3': 
              name: Dining Table

Initial configuration and discovery

Maybe the most difficult thing about a Dynalite system is finding out the areas and channel mapping. If you have them or have access to the Dynalite software and your configuration files, this could be easy, but in the likely case that your system was installed by an integrator, you will have to discover them on your own.

This is where the autodiscover option comes handy. If it is on, the component will track the Dynet network and every time a device is used, it will be added to Home Assistant. It will initially show as "Area 123 Channel 7", but you can then add it to your configuration.yaml with the correct configuration.

For example, you would go to your kitchen light and turn it on. Now you log into Home Assistant and see what the channel was. If there was more than one discovered (e.g., someone turned off the living room lights), you can try one, turn it on and off in Home Assistant and see which light it affects.

The initial process can be a bit time consuming and tedious, but it only has to be done once. Once you are done configuring, it is better to set autodiscover to false, since there are many "fake" channels and areas that the system uses for internal communication and you do not want to have visible.