home-assistant.io/source/_integrations/airq.markdown

title, description, ha_category, ha_release, ha_iot_class, ha_codeowners, ha_domain, ha_config_flow, ha_platforms, ha_integration_type

title	description	ha_category	ha_release	ha_iot_class	ha_codeowners	ha_domain	ha_config_flow	ha_platforms	ha_integration_type
air-Q	Instructions on how to integrate air-Q into Home Assistant	Environment Health Sensor	2022.12	Local Polling	@Sibgatulin @dl2080	airq	true	sensor	hub

This integration allows integrating the sensors, provided by your air-Q device, into Home Assistant.

{% include integrations/config_flow.md %}

During the configuration, the user is prompted for the IP address of the device or the first 5 characters of the serial number, as well as the device password.

For this integration to communicate with the device, both must be connected to the same Wi-Fi network.

Sensors

Currently, the integration supports the following sensors:

Sensor name	Unit of measurement
Ammonia	µg/m³
Chlorine	µg/m³
CO	mg/m³
CO2	ppm
Dew Point	°C
Ethanol	µg/m³
Formaldehyde	µg/m³
H2S	µg/m³
Health Index	%
Humidity (relative)	%
Absolute Humidity	g/m³
Hydrogen	µg/m³
Methane	%
N2O	µg/m³
NO	µg/m³
NO2	µg/m³
Ozone	µg/m³
Oxygen	µg/m³
Performance Index	%
PM1, PM25, PM10[^pm]	µg/m³
Pressure	hPa
Relative Pressure	hPa
Propane	%
SO2	µg/m³
Noise	dBa
Noise (Maxumum)	dBa
Radon	Bq/m³
Temperature	°C
VOC	ppb
VOC (Industrial)	ppb

PM1, PM25, and PM10 correspond to concentrations of particulates with diameter less than 1µm, 2.5µm, and 10µm respectively

After the setup, separate entities will be created for each of the aforementioned sensors, found in your device.