2.2 KiB
| title | description | ha_category | ha_release | ha_iot_class | ha_domain | ha_platforms | ha_integration_type | ||
|---|---|---|---|---|---|---|---|---|---|
| Telnet | Instructions on how to integrate telnet switches into Home Assistant. |
|
0.54 | Local Polling | telnet |
|
integration |
The telnet switch platform allows you to control devices with telnet commands.
To enable this switch, add the following lines to your configuration.yaml file:
{% raw %}
# Example configuration.yaml entry
switch:
- platform: telnet
switches:
projector:
resource: THE_IP_ADDRESS
port: 4002
command_on: "PWR ON"
command_off: "PWR OFF"
command_state: "PWR?"
value_template: '{{ value == "PWR=01" }}'
timeout: 0.9
{% endraw %}
{% configuration %}
switches:
description: The array that contains all switches.
required: true
type: list
keys:
identifier:
description: Name of the switch as slug. Multiple entries are possible.
required: true
type: list
keys:
resource:
description: Host name or IP address of the device.
required: true
type: string
port:
description: Port to connect to.
required: false
default: 23
type: integer
command_on:
description: Command to turn device on.
required: true
type: string
command_off:
description: Command to turn device off.
required: true
type: string
command_state:
description: Command to determine the state of the switch. If not defined the switch will assume successful state changes.
required: false
type: string
value_template:
description: The template evaluating to true will indicate that the switch is on.
required: false
type: template
name:
description: The name used to display the switch in the frontend.
required: false
type: string
timeout:
description: How long to wait for a reply after a telnet command is sent.
required: false
default: 0.2
type: float
{% endconfiguration %}