home-assistant.io/source/_components/device_tracker.unifi.markdown

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_iot_class, ha_release

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category	ha_iot_class	ha_release
page	Ubiquiti Unifi WAP	Instructions on how to use a Unifi WAP controller as a device tracker module.	2016-02-19 20:59	true	false	true	true	ubiquiti.png	Presence Detection	Local Polling	0.14

This platform allows you to detect presence by looking at devices connected to a Ubiquiti Unifi controller.

To use this device tracker in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
device_tracker:
  - platform: unifi
    host: unifi
    username: username
    password: password
    ssid_filter:
      - 'HomeSSID'
      - 'IoTSSID'

{% configuration %} username: description: A user on the controller type: string required: true password: description: The password for the account type: string required: true host: description: The hostname or IP address of your controller default: localhost type: string required: false port: description: The port of your controller's web interface default: 8443 type: integer required: false site_id: description: For multisite installations, you can specify site_id to specify which is used type: string required: false default: default verify_ssl: description: Whether to do strict validation on SSL certificates of the Unifi controller. This can be true/false or the path to a locally trusted certificate to use for verification (i.e. "/path/to/custom_cert.pm") type: boolean or filename required: false default: true detection_time: description: How long since the last seen time before the device is marked away, specified in seconds. type: integer required: false default: 300 ssid_filter: description: Filter the SSIDs that tracking will occur on. type: list of strings required: false default: None monitored_conditions: description: A list of extra attributes to pull from the Unifi controller. type: list required: false default: None

{% endconfiguration %}

See the device tracker component page for instructions how to configure the people to be tracked.

{% linkable_title Configuring Users %}

The Unifi controller allows you to create multiple users on it besides the main administrator. It is recommended that you create a limited user that has read-only permissions for the Unifi device tracker.

{% linkable_title Conflicts with MQTT %}

The Unifi controller can either be a dedicated hardware device (Unifi's cloud key), or as software any Linux system. If you run the Unifi controller on the same operating system as Home Assistant there may be conflicts in ports if you have the MQTT component as well.

It is recommended that you run the Unifi controller in a dedicated virtual machine to avoid that situation.

{% linkable_title Correctly specifying the Site ID %}

For environments where there are multiple sites setup on the controller, or the default site is not being used you can use the site_id parameter to specify which site you would like to target.

Please note that the value that is to be specificed here is not the name of the site as you would see it in controller interface, but a site ID value assigned from the software itself.

To obtain this value for your configuration file, you can take it from the URL of your browser when on the controller webpage.

For example, this is what would be seen in the URL bar when inside the dashboard page of a site:

• https://127.0.0.1:8443/manage/s/ceb1m27d/dashboard

And your site_id value would be ceb1m27d.

{% linkable_title Troubleshooting and Time Synchronization %}

Presence detection depends on accurate time configuration between Home Assistant and the Unifi controller.

If Home Assistant and the Unifi controller are running on separate machines or VMs ensure that all clocks are synchronized. Failing to have synchronized clocks will lead to Home Assistant failing to mark a device as home.

Related Issue

{% linkable_title Monitored Conditions %}

The Unifi controller returns a number of additional attributes that can be used for tracking devices, including signal strength, rx/tx rates, and which AP it is connected to. The list of possible options may vary depending on your Unifi controller version and if a device is wired or wireless.

Unifi Controller version 5.6.29 has the following options:

• _id
• _is_guest_by_uap
• _last_seen_by_uap
• _uptime_by_uap
• ap_mac
• assoc_time
• authorized
• bssid
• bytes-r
• ccq
• channel
• essid
• first_seen
• hostname
• idletime
• ip
• is_11r
• is_guest
• is_wired
• last_seen
• latest_assoc_time
• mac
• name
• noise
• noted
• oui
• powersave_enabled
• qos_policy_applied
• radio
• radio_proto
• rssi
• rx_bytes
• rx_bytes-r
• rx_packets
• rx_rate
• signal
• site_id
• tx_bytes
• tx_bytes-r
• tx_packets
• tx_power
• tx_rate
• uptime
• user_id
• usergroup_id
• vlan