1.7 KiB
title, description, ha_category, ha_iot_class, ha_release, ha_domain, ha_codeowners, ha_config_flow, ha_quality_scale, ha_zeroconf, ha_platforms
| title | description | ha_category | ha_iot_class | ha_release | ha_domain | ha_codeowners | ha_config_flow | ha_quality_scale | ha_zeroconf | ha_platforms | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bond | Instructions on setting up Bond Bridge within Home Assistant. |
|
Local Push | 0.113 | bond |
|
true | platinum | true |
|
The Bond integration allows you to control appliances through your Bond Bridge. Duplicates your RF remote control.
Supported devices (see Requirements section below):
- Ceiling fans
- Shades
- Fireplaces
Tested Bond Devices
The following devices have been tested with Home Assistant and confirmed to be working:
- Bond Bridge v1 (snowbird)
- Bond Bridge v2 (zermatt)
- Bond Bridge Pro (zermatt-pro)
- Smart By Bond Fans (breck)
Prerequisites
To use Bond controlled devices in your installation, add your Bond hub host and access token from the integrations page. Instructions for how to obtain an access token can be found on the Bond Local API documentation, which includes a section for how to obtain the IP address of the device which you will need to obtain the access token.
{% include integrations/config_flow.md %}
Requirements
This integration supports Bond bridges with firmware v2.10.x and up. Bond bridges with firmware v2.9.x and lower will not work correctly. Please upgrade your firmware from Bond app before adding this integration.
BPUP Support (Push updates)
Firmware version 2.10.8 or newer is required for push updates. The integration will fallback to polling for 2.10.x versions lower than .8