mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-11-09 11:09:00 +00:00
7bb9c1f00a
* Add note about newer JVC models requiring a password * Adjusted wording * Update source/_integrations/jvc_projector.markdown Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com> * Change wording to include more models --------- Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
104 lines
2.1 KiB
Markdown
104 lines
2.1 KiB
Markdown
---
|
|
title: JVC Projector
|
|
description: Instructions on how to integrate JVC Projector into Home Assistant.
|
|
ha_category:
|
|
- Remote
|
|
ha_release: '2023.6'
|
|
ha_iot_class: Local Polling
|
|
ha_config_flow: true
|
|
ha_codeowners:
|
|
- '@SteveEasley'
|
|
- '@msavazzi'
|
|
ha_domain: jvc_projector
|
|
ha_platforms:
|
|
- binary_sensor
|
|
- remote
|
|
- select
|
|
- sensor
|
|
ha_integration_type: device
|
|
---
|
|
|
|
The JVC Projector integration allows for the automation of [JVC Projectors](https://www.jvc.com/usa/projectors/).
|
|
|
|
## Supported models
|
|
|
|
This integration is intended for the automation of any modern JVC Projector with a network port.
|
|
|
|
## Prerequisites
|
|
|
|
JVC is requiring newer 2024+ models to use a user-generated password to access the network port for security reasons.
|
|
|
|
To set up these models:
|
|
|
|
1. Set a password on the projector's network setup page.
|
|
2. Use this password when adding the JVC Projector integration in Home Assistant.
|
|
|
|
|
|
{% include integrations/config_flow.md %}
|
|
|
|
## Remote
|
|
|
|
The JVC Projector remote platform will create a [Remote](/integrations/remote/) entity for the device. This entity allows you to send the following commands via the [remote.send_command](/integrations/remote/) action.
|
|
|
|
- `menu`
|
|
- `up`
|
|
- `down`
|
|
- `left`
|
|
- `right`
|
|
- `ok`
|
|
- `back`
|
|
- `info`
|
|
- `input`
|
|
- `hide`
|
|
- `mpc`
|
|
- `cmd`
|
|
- `advanced_menu`
|
|
- `picture_mode`
|
|
- `color_profile`
|
|
- `lens_control`
|
|
- `setting_memory`
|
|
- `gamma_settings`
|
|
- `hdmi_1`
|
|
- `hdmi_2`
|
|
- `mode_1`
|
|
- `mode_2`
|
|
- `mode_3`
|
|
- `lens_ap`
|
|
- `gamma`
|
|
- `color_temp`
|
|
- `natural`
|
|
- `cinema`
|
|
- `anamo`
|
|
- `3d_format`
|
|
|
|
### Binary sensor
|
|
|
|
The following sensor types are supported:
|
|
|
|
- Power on is True when projector is in status "on", "warming"
|
|
|
|
### Sensor
|
|
|
|
Introduces two sensors to detect Power Status and HDMI Input.
|
|
|
|
Detailed Power Status values:
|
|
|
|
- `standby`
|
|
- `on`
|
|
- `warming`
|
|
- `cooling`
|
|
- `error`
|
|
|
|
Please note that if the projector is off, it will not respond to remote polling and will show as *unavailable*.
|
|
|
|
Detailed HDMI Input values:
|
|
|
|
- `hdmi1`
|
|
- `hdmi2`
|
|
|
|
### Selects
|
|
|
|
The following Select entities are added. They allow changing the device state from a list of options.
|
|
|
|
- `input`
|