home-assistant.io/source/_components/switch.digitalloggers.markdown

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release, ha_iot_class

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category	ha_release	ha_iot_class
page	Digital Loggers Switch	Instructions on how to integrate Digital Loggers DIN III relays into Home Assistant.	2016-10-02 10:00	true	false	true	true	digitalloggers.png	Switch	0.35	Local Polling

The digitalloggers switch platform allows you to control the state of your Digital Loggers switches.

{% linkable_title Configuration %}

To use your digitalloggers switch in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
switch:
  - platform: digitalloggers
    host: 192.168.1.43

Configuration variables:

• host (Required): The IP address or FQDN of your DIN III relay, eg. 192.168.1.32 or myrelay.example.com.
• name (Optional): The name to use when controlling this relay. Default: DINRelay.
• username (Optional): Credentials for controlling this relay. Default: admin.
• password (Optional): Credentials for controlling this relay. Default: admin.
• timeout (Optional): Default timeout as set by the underlying python-dlipower library is 20 seconds. Override it if you need to. Valid range is 1 to 600.
• cycletime (Optional): This is the delay enforced by the library when you send multiple commands to the same device. The default relay cycle time is 2 seconds. Override it if you need to. Valid range is 1 to 600. A delay is a recommendation of Digital Loggers:

Many loads draw more power when they are initially switched on. Sequencing prevents circuit overloads when loads devices are attached to a single circuit.

Your relays will be available in the form switch.fantasticrelaydevice_individualrelayname

Note: There is currently a limitation of the dlipower library used by the digitalloggers component that communication is only available over port 80.