home-assistant.io/source/_integrations/technove.markdown

title	description	ha_category	ha_release	ha_iot_class	ha_domain	ha_config_flow	ha_zeroconf	ha_codeowners	ha_platforms	ha_integration_type
TechnoVE	Instructions on how to integrate TechnoVE Smart Charging Station with Home Assistant.	Car	2024.2	Local Polling	technove	true	true	@Moustachauve	binary_sensor diagnostics number sensor switch	device

The TechnoVE integration provides connectivity with TechnoVE Smart Charging Station through the station local API.

{% include integrations/config_flow.md %}

Binary sensors

The {% term integration %} adds the following binary sensors:

• Battery protected - On / Off
• Charging - Charging / Not charging
• Conflict with power sharing mode - On / Off
• Power sharing mode - On / Off
• Static IP - Connected / Not Connected
• Update - Up-to-date / Update available

Number

The {% term integration %} adds the following number entity:

Name	Description
max current	Determines the maximum current limit that the charging station can provide to the vehicle. Note: this value can only be set when the power-sharing mode is not enabled.

Sensors

The {% term integration %} adds the following sensors:

• Input voltage
• Output voltage
• Max station current
• Current
• Total energy usage
• Last session energy usage
• Wi-Fi signal strength
• Wi-Fi network name
• Status, one of the following values:
  • Unplugged
  • Plugged, waiting
  • Plugged, charging
  • Out of activation period
  • High tariff period

Switch

The {% term integration %} adds the following switch:

Name	Description
Auto-charge mode	When enabled, vehicles will start charging automatically when plugged in. When turned off, charging will need to be manually started each time a vehicle is plugged in. Note: Disabling auto-charge mode does not interrupt an ongoing charging session.
Charging enabled	When enabled, vehicles will be able to charge. Disable it to stop a vehicle from charging. Note: This switch can only be used when auto-charge mode is disabled.