home-assistant.io/source/_docs/z-wave/installation.markdown

layout, title, description, date, sidebar, comments, sharing, footer, redirect_from

layout	title	description	date	sidebar	comments	sharing	footer	redirect_from
page	Z-Wave	Installation of the Z-Wave component.	2017-09-21 10:00	true	false	true	true	/getting-started/z-wave-installation/

Z-Wave can be configured using the Z-Wave Integration in the Configuration menu, or manually using an entry in configuration.yaml

{% linkable_title Configuration %}

# Example configuration.yaml entry
zwave:
  usb_path: /dev/ttyACM0
  device_config: !include zwave_device_config.yaml

{% configuration zwave %} usb_path: description: The port where your device is connected to your Home Assistant host. Z-Wave sticks will generally be /dev/ttyACM0 and GPIO hats will generally be /dev/ttyAMA0. required: false type: string default: /zwaveusbstick network_key: description: The 16-byte network key in the form "0x01, 0x02..." used in order to connect securely to compatible devices. It is recommended that a network key is configured as security enabled devices may not function correctly if they are not added securely. required: false type: string default: None config_path: description: "The path to the Python OpenZWave configuration files. NOTE: there is also the update_config service to perform updating the config within python-openzwave automatically." required: false type: string default: the 'config' that is installed by python-openzwave polling_interval: description: The time period in milliseconds between polls of a nodes value. Be careful about using polling values below 30000 (30 seconds) as polling can flood the zwave network and cause problems. required: false type: integer default: 60000 debug: description: Print verbose z-wave info to log. required: false type: boolean default: false autoheal: description: Allows enabling auto Z-Wave heal at midnight. Warning, this is in efficient and should not be used. required: false type: boolean default: false device_config / device_config_domain / device_config_glob: description: "This attribute contains node-specific override values. NOTE: This needs to be specified if you are going to use any of the following options. See Customizing devices and services for the format." required: false type: string, list keys: ignored: description: Ignore this entity completely. It won't be shown in the Web Interface and no events are generated for it. required: false type: boolean default: false polling_intensity: description: Enables polling of a value and sets the frequency of polling (0=none, 1=every time through the list, 2=every other time, etc). If not specified then your device will not be polled. required: false type: integer default: 0 refresh_value: description: Enable refreshing of the node value. Only the light component uses this. required: false type: boolean default: false delay: description: Specify the delay for refreshing of node value. Only the light component uses this. required: false type: integer default: 5 invert_openclose_buttons: description: Inverts function of the open and close buttons for the cover domain. This will not invert the position and state reporting. required: false type: boolean default: false {% endconfiguration %}

{% linkable_title Network Key %}

Security Z-Wave devices require a network key before being added to the network using the Add Secure Node button in the Z-Wave Network Management card. You must set the network_key configuration variable to use a network key before adding these devices.

An easy script to generate a random key:

$ cat /dev/urandom | tr -dc '0-9A-F' | fold -w 32 | head -n 1 | sed -e 's/\(..\)/0x\1, /g' -e 's/, $//'

You can also use sites like this one to generate the required data, just remember to put 0x before each pair of characters:

# Example configuration.yaml entry for network_key
zwave:
  network_key: "0x2e, 0xcc, 0xab, 0x1c, 0xa3, 0x7f, 0x0e, 0xb5, 0x70, 0x71, 0x2d, 0x98, 0x25, 0x43, 0xee, 0x0c"

Ensure you keep a backup of this key. If you have to rebuild your system and don't have a backup of this key, you won't be able to reconnect to any security devices. This may mean you have to do a factory reset on those devices, and your controller, before rebuilding your Z-Wave network.

{% linkable_title First Run %}

On platforms other than Hass.io and Docker, the compilation and installation of python-openzwave happens when you first enable the Z-Wave component, and can take half an hour or more on a Raspberry Pi. When you upgrade Home Assistant and python-openzwave is also upgraded, this will also result in a delay while the new version is compiled and installed.

The first run after adding a device is when the zwave component will take time to initialize the entities, some entities may appear with incomplete names. Running a network heal may speed up this process.

{% linkable_title Platform specific instructions %}

{% linkable_title Hass.io %}

You do not need to install any software to use Z-Wave.

If the path of /dev/ttyACM0 doesn't work, look in the System section of the Hass.io menu. There you'll find a Hardware button which will list all the hardware found.

You can also check what hardware has been found using the hassio command:

$ hassio hardware info

{% linkable_title Docker %}

You do not need to install any software to use Z-Wave.

To enable access to the Z-Wave stick, add --device=/dev/ttyACM0 to the docker command that starts your container, for example:

$ docker run -d --name="home-assistant" -v /home/pi/homeassistant:/config -v /etc/localtime:/etc/localtime:ro --net=host --device=/dev/ttyACM0 homeassistant/raspberrypi3-homeassistant

If the path of /dev/ttyACM0 doesn't work then you can find the path of the stick by disconnecting and then reconnecting it, and running the following in the Docker host:

$ ls -1tr /dev/tty*|tail -n 1

{% linkable_title Hassbian %}

You do not need to install any software to use Z-Wave.

To find the path of your Z-Wave USB stick, disconnect it and then reconnect it to your system and run:

$ ls -1tr /dev/tty*|tail -n 1

{% linkable_title Community install methods %}

{% linkable_title Raspberry Pi specific %}

On the Raspberry Pi you will need to enable the serial interface in the raspi-config tool before you can add Z-Wave to Home Assistant.

{% linkable_title Linux (except Hassbian) %}

On Debian Linux platforms there two dependencies you will need to have installed ahead of time (included in systemd-devel on Fedora/RHEL systems):

$ sudo apt-get install libudev-dev
$ sudo apt-get install libopenzwave1.5-dev

You may also have to install the Python development libraries for your version of Python. For example libpython3.6-dev, and possibly python3.6-dev if you're using Python 3.6.

{% linkable_title Finding the controller path %}

To find the path of your Z-Wave USB stick, disconnect it and then reconnect it to your system and run:

$ ls -ltr /dev/tty*|tail -n 1

That will give you a line that looks something like this:

crw-rw---- 1 root dialout 204, 64 Sep 21 10:25 /dev/ttyACM0

Where the date and time displayed is approximately the time you connected the USB stick or module (it may also be something like /dev/ttyAMA0 or /dev/ttyUSB0). The number will be zero for the first device connected, and higher numbers for later devices.

Or, if there is no result, try to find detailed USB connection info with:

$ dmesg | grep USB

If Home Assistant (hass) runs with another user (e.g., homeassistant) you need to give access to the stick with:

$ sudo usermod -aG dialout homeassistant

The output from ls -ltr above contains the following information:

• The device type is c (character special)
• The permissions are rw-rw----, meaning only the owner and group can read and write to it
• There is only 1 link to the file
• It is owned by root and can be accessed by members of the group dialout
• It has a major device number of 204, and a minor device number of 64
• The device was connected at 10:25 on 21 September
• The device is /dev/ttyUSB0.

{% linkable_title macOS %}

When installing on macOS you may have to also run the command below ahead of time, replace "x.x" with the version of Python ($ python3 --version) you have installed.

$ sudo /Applications/Python\ x.x/Install\ Certificates.command

On macOS you can find the USB stick with:

$ ls /dev/cu.usbmodem*

{% linkable_title Troubleshooting %}

{% linkable_title Device path changes %}

If your device path changes when you restart, see this guide on fixing it.

{% linkable_title Component could not be set up %}

Sometimes the device may not be accessible and you'll get an error message upon startup about not being able to set up Z-Wave. Run the following command for your device path (here we're using /dev/ttyAMA0 for our Razberry board):

$ ls -l /dev/ttyAMA0

You should then see something like this:

crw-rw---- 1 root dialout 204, 64 Apr  1 12:34 /dev/ttyAMA0

The important pieces are the first piece crw-rw---- and the group dialout. If those are different then, for your device path, run:

$ sudo chgrp dialout /dev/ttyAMA0
$ sudo chmod g+rw /dev/ttyAMA0

Check too that the account you're running Home Assistant as is in the dialout group. For instance, if you're using homeassistant:

$ groups homeassistant

That should include dialout, if it doesn't then:

$ sudo usermod -aG dialout homeassistant

{% linkable_title Unable to install Python Openzwave %}

If you're getting errors like:

openzwave-embed/open-zwave-master/libopenzwave.a: No such file or directory

Then the problem is that you're missing libudev-dev (or the equivalent for your distribution), please install it.