1f40fdb09d
* Initial snmp sensor docs (#538) * Fixed markdown and added logo (#551) * Added documentation for router operating mode for asuswrt (#545) * local_file camera component documenatation (#554) * Documenation for local_file camera component * Update camera.local_file.markdown * Added information about voltage sensor * Instructions for Pandora media player (#552) * Add release * Add pub_key * Add BT Home Hub docs * Markdown tweaks (#553) * Add docs about MySensors IR switch (#556) * Update sensor.mysensors docs, about moving V_IR_SEND type to switch platform. * Update switch.mysensors docs. Add section about the new service and additional example sketch for the IR switch device. * Update index.html * plex sensor (#526) * Add var descriptions * Adds documentation for the Local File Camera (#482) * Revert "Adds documentation for the Local File Camera" (#563) * Minor changes * Add Wink Rollershutter (#559) * Added example of using template in shell_command. (#547) * Add Documentation for Netatmo Welcome (#542) * Reorganize documentation for Netatmo As Netatmo is now a Hub component, documentations has been splitted in several parts betweent the hub, the sensors and the camera Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com> * Add configuration variables for Netatmo Welcome cameras * Add ha_release information on new documentation pages * Netatmo Weather Station is a weather sensor * Add blog post 0.22
2.5 KiB
layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release
| layout | title | description | date | sidebar | comments | sharing | footer | logo | ha_category | ha_release |
|---|---|---|---|---|---|---|---|---|---|---|
| page | RFXtrx Rollershutter | Instructions how to integrate RFXtrx roller shutters into Home Assistant. | 2016-06-12 12:40 | true | false | true | true | rfxtrx.png | Rollershutter | 0.21 |
The rfxtrx platform supports Siemens/LightwaveRF and RFY roller shutters that communicate in the frequency range of 433.92 MHz.
First you have to set up your rfxtrx hub.
{% linkable_title Configuration %}
Siemens/LightwaveRF
The easiest way to find your roller shutters is to add this to your configuration.yaml:
rollershutter:
platform: rfxtrx
automatic_add: True
Launch your homeassistant and go the website (e.g http://localhost:8123). Push your remote and your device should be added.
Once added it will show an ID (e.g 0b11000102ef9f210010f70) and you can verify that it works from the frontend.
Then you should update your configuration to:
rollershutter:
platform: rfxtrx
devices:
0b11000102ef9f210010f70:
name: device_name
RFY
The RFXtrx433e is required for RFY support, however it does not support receive for the RFY protocol - as such devices cannot be automatically added. Instead, configure the device in the rfxmngr tool. Make a note of the assigned ID and Unit Code and then add a device to the configuration with the following id 071a0000[id][unit_code]. Eg, if the id was 0a 00 01, and the unit code was 01 then the fully qualified id would be 071a00000a000101.
Common
Example configuration:
# Example configuration.yaml entry
rollershutter:
platform: rfxtrx
automatic_add: False
signal_repetitions: 2
devices:
0b1100ce3213c7f210010f70: # Siemens/LightwaveRF
name: Bedroom Shutter
070a00000a000101: # RFY
name: Bathroom Shutter
Configuration variables:
- devices (Required): A list of devices with their name to use in the frontend.
- automatic_add (Optional): To enable the automatic addition of new roller shutters (Siemens/LightwaveRF only).
- signal_repetitions Optional: Because the rxftrx device sends its actions via radio and from most receivers it's impossible to know if the signal was received or not. Therefore you can configure the roller shutter to try to send each signal repeatedly.
- fire_event Optional: Fires an event even if the state is the same as before. Can be used for automations.