6577daf37f
* Update KNX component configuration variable Update style of KNX component (all the 7 files) documentation to follow new configuration variables description. Related to #6385. * Update binary_sensor.knx.markdown * 🚑 Syntax fix * 🚑 Tweak after source check * 🚑 Tweak after suggestion
2.5 KiB
| layout | title | description | date | sidebar | comments | sharing | footer | logo | ha_category | ha_release | ha_iot_class |
|---|---|---|---|---|---|---|---|---|---|---|---|
| page | KNX Cover | Instructions on how to integrate KNX covers with Home Assistant. | 2017-06-18 12:00 | true | false | true | true | knx.png | Cover | 0.48 | Local Polling |
The knx cover platform is used as in interface with KNX covers.
The knx component must be configured correctly, see KNX Component.
To use your KNX covers in your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
cover:
- platform: knx
name: "Kitchen.Shutter"
move_long_address: '3/0/0'
move_short_address: '3/0/1'
position_address: '3/0/3'
position_state_address: '3/0/2'
travelling_time_down: 51
travelling_time_up: 61
{% configuration %} name: description: A name for this device used within Home Assistant. required: false default: KNX Cover type: string move_long_address: description: KNX group address for moving the cover full up or down. required: false type: string move_short_address: description: KNX group address for moving the cover short time up or down. If the KNX device has a stop group address you can use that here. required: false type: string position_address: description: KNX group address for moving the cover to the dedicated position. required: false type: string position_state_address: description: Separate KNX group address for requesting the current position of the cover. required: false type: string angle_address: description: KNX group address for moving the cover to the dedicated angle. required: false type: string angle_state_address: description: Separate KNX group address for requesting the current angle of cover. required: false type: string travelling_time_down: description: Time cover needs to travel down in seconds. Needed to calculate the intermediate positions of cover while traveling. required: false default: 25 type: integer travelling_time_up: description: Time cover needs to travel up in seconds. Needed to calculate the intermediate positions of cover while traveling. required: false default: 25 type: integer invert_position: description: Set this to true if your actuator report fully closed as 100%. required: false default: false type: boolean invert_angle: description: Set this to true if your actuator reports tilt fully closed as 100%. required: false default: false type: boolean {% endconfiguration %}