home-assistant.io/source/_components/ness_alarm.markdown

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release, ha_iot_class, redirect_from

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category	ha_release	ha_iot_class	redirect_from
page	Ness Alarm	Instructions on how to integrate a Ness D8x/D16x alarm system with Home Assistant.	2018-11-25 18:00	true	false	true	true	ness.png	Alarm Binary Sensor	0.85	Local Push	/components/alarm_control_panel.ness_alarm/ /components/binary_sensor.ness_alarm/

The ness_alarm component will allow Home Assistant users who own a Ness D8x/D16x alarm system to leverage their alarm system and its sensors to provide Home Assistant with information about their homes. Connectivity between Home Assistant and the alarm is accomplished through a IP232 module that must be connected to the alarm.

There is currently support for the following device types within Home Assistant:

• Binary Sensor: Reports on zone statuses
• Alarm Control Panel: Reports on alarm status, and can be used to arm/disarm the system

The module communicates via the Ness D8x/D16x ASCII protocol.

{% linkable_title Configuration %}

A ness_alarm section must be present in the configuration.yaml file and contain the following options as required:

# Example configuration.yaml entry
ness_alarm:
  host: alarm.local
  port: 2401
  zones:
    - name: Garage
      id: 1
    - name: Storeroom
      id: 2
    - name: Kitchen
      id: 3
    - name: Front Entrance
      id: 4
    - name: Front Door
      id: 5
      type: door

{% configuration %} host: description: The hostname of the IP232 module on your home network. required: true type: string port: description: The port on which the IP232 module listens for clients. required: true type: integer zones: description: List of zones to add required: false type: list keys: zone_id: description: ID of the zone on the alarm system (i.e Zone 1 -> Zone 16). required: true type: integer name: description: Name of the zone. required: true type: string type: description: The zone type. Can be any binary_sensor device class. required: false default: motion type: string {% endconfiguration %}