2.8 KiB
| layout | title | description | date | sidebar | comments | sharing | footer | logo | ha_category | ha_release | ha_iot_class |
|---|---|---|---|---|---|---|---|---|---|---|---|
| page | FRITZ!Box Net Monitor | Instructions on how to integrate an AVM FRITZ!Box monitor into Home Assistant. | 2017-01-17 22:00 | true | false | true | true | avm.png | System Monitor | 0.36 | Local Polling |
The fritzbox_netmonitor sensor monitors the network statistics exposed by AVM Fritz!Box routers.
It might be necessary to install additional packages: $ sudo apt-get install libxslt-dev libxml2-dev python3-lxml
If you are working with the All-in-One installation, you may also need to execute also within your virtual environment the command pip3 install lxml; be patient this will take a while.
To use the Fritz!Box network monitor in your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
sensor:
- platform: fritzbox_netmonitor
{% configuration %} host: description: The IP address of your router, e.g., 192.168.1.1. It is optional since every fritzbox is also reachable by using the IP address 169.254.1.1. required: false default: 169.254.1.1 type: string name: description: Give the sensor a friendly name for in the front-end. required: false default: fritz_netmonitor type: string {% endconfiguration %}
The following statistics will be exposed as attributes.
| Attribute | Description |
|---|---|
| is_linked | True if the FritzBox is physically linked to the provider |
| is_connected | True if the FritzBox has established an internet-connection |
| wan_access_type | Connection-type, can be DSL or Cable |
| external_ip | External ip address |
| uptime | Uptime in seconds |
| bytes_sent | Bytes sent |
| bytes_received | Bytes received |
| transmission_rate_up | Current upstream speed in bytes/s |
| transmission_rate_down | Current downstream speed in bytes/s |
| max_byte_rate_up | Maximum upstream-rate in bytes/s |
| max_byte_rate_down | Maximum downstream-rate in bytes/s |
The sensor's state corresponds to the is_linked attribute and is either online, offline, or unavailable (in case connection to the router is lost).
This component does not support "Fritz!Box 6490 Cable" with FritzOS 6.87 installed.