ebca3218c7
* Automatically create linkable headers
* Visually improve position of linkable header chain icon
* Do not auto link headers on homepage
* Remove linkable_title everywhere
* 🚑 Re-instante linkable_title plugin as NOOP
2.0 KiB
layout, title, description, date, sidebar, comments, sharing, footer
| layout | title | description | date | sidebar | comments | sharing | footer |
|---|---|---|---|---|---|---|---|
| page | Z-Wave Controllers | Extended instructions how to setup Z-Wave. | 2016-03-24 08:49 -0700 | true | false | true | true |
Supported Z-Wave USB Sticks & Hardware Modules
You need to have a compatible Z-Wave stick or module installed. This needs to be a static controller, which most Z-Wave sticks and modules will be. If yours is a bridge device then it won't work with OpenZWave, which is what provides Home Assistant's Z-Wave capabilities. The following devices have been confirmed to work:
- Aeotec Z-Stick Series 5
- Everspring USB stick - Gen 5
- Sigma Designs UZB stick
- Vision USB stick - Gen5
- Zooz Z-Wave Plus S2 stick ZST10
- ZWave.me Razberry Board
- ZWave.me UZB1 stick
We recommend that you purchase a Z-Wave Plus controller, to take advantage of the improvements this provides. As OpenZWave doesn't support S2 or Smart Start, there's no need to buy one just for support of these features.
If you're using Hass.io or running HASS in a Docker container, it's recommended to use a USB stick, not a module. Passing a module through Docker is more complicated than passing a USB stick through.
Stick Alternatives
The alternative to a stick is a hub that supports Z-Wave. Home Assistant supports the following hubs with Z-Wave support:
Controller Notes
Aeotec Stick
By default this will turn on "disco lights", which you can turn off by following the instructions in the device specific page
Razberry Board
You need to disable the on-board Bluetooth since the board requires the use of the hardware UART (and there's only one on the Pi3). You do this by following the instructions in the device specific page