mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-05-15 07:28:58 +00:00
77144721d7
* Document allowing Pilight Binary Sensor to control reset_delay_sec through configuration * Minimize configuration sample
50 lines
1.8 KiB
Markdown
50 lines
1.8 KiB
Markdown
---
|
|
layout: page
|
|
title: "Pilight Binary Sensor"
|
|
description: "Instructions how to integrate pilight binary sensors within Home Assistant."
|
|
date: 2017-03-24 20:41
|
|
sidebar: true
|
|
comments: false
|
|
sharing: true
|
|
footer: true
|
|
logo: pilight.png
|
|
ha_category: Binary Sensor
|
|
ha_release: 0.44
|
|
ha_iot_class: "Local Polling"
|
|
---
|
|
|
|
This component implement the [pilight hub](https://github.com/home-assistant/home-assistant.github.io/source/_components/pilight.markdown) binary sensor functionality.
|
|
Two type of pilight binary sensor configuration available. A normal sensor which send the on and off state cyclical and a trigger sensor which send only a trigger when an event happend (for example lots of cheap PIR motion detector) (see example configuration below).
|
|
|
|
```yaml
|
|
# Example configuration.yml entry
|
|
binary_sensor:
|
|
- platform: pilight
|
|
variable: 'state'
|
|
```
|
|
|
|
Configuration variables:
|
|
|
|
- **variable** (*Required*): The variable name in the data stream that defines the sensor value.
|
|
- **payload** (*Required*): Message payload identifiers. Only if all identifiers are matched the sensor value is set.
|
|
- **name** (*Optional*): Name of the sensor.
|
|
- **payload_on** (*Optional*): Variable `on` value. The component will recognize this as logical '1'.
|
|
- **payload_off** (*Optional*): Variable `off` value. The component will recognize this as logical '0'.
|
|
- **disarm_after_trigger:** (*Optional*): Configure sensor as trigger type.
|
|
- **reset_delay_sec** (*Optional*): Seconds before the sensor is disarmed if `disarm_after_trigger` is set to true. Default is 30 seconds.
|
|
|
|
A full configuration example could look like this:
|
|
|
|
```yaml
|
|
# Example configuration.yml entry
|
|
binary_sensor:
|
|
- platform: pilight
|
|
name: 'Motion'
|
|
variable: 'state'
|
|
payload:
|
|
unitcode: 371399
|
|
payload_on: 'closed'
|
|
disarm_after_trigger: True
|
|
reset_delay_sec: 30
|
|
```
|