home-assistant.io/source/_components/sensor.rflink.markdown

layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release, ha_iot_class

layout	title	description	date	sidebar	comments	sharing	footer	logo	ha_category	ha_release	ha_iot_class
page	RFLink Sensor	Instructions on how to integrate RFLink sensors into Home Assistant.	2016-01-04	true	false	true	true	rflink.png	Sensor	0.38	Local Polling

The rflink component support devices that use RFLink gateway firmware, for example the Nodo RFLink Gateway. RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver).

First you have to set up your rflink hub.

After configuring the RFLink hub sensors will be automatically discovered and added.

RFLink sensor ID's are composed of: protocol, id and type (optional). For example: alectov1_0334_temp. Some sensors emit multiple types of data. Each will be created as its own

Once the ID of a sensor is known it can be used to configure the sensor in HA, for example to add it to a different group, hide it or configure a nice name.

Assigning name to a sensor:

# Example configuration.yaml entry
sensor:
  - platform: rflink
    devices:
      alectov1_0334_temp:
        sensor_type: temperature

{% configuration %} automatic_add: description: Automatically add new/unconfigured devices to Home Assistant if detected. required: false default: true type: boolean devices: description: A list of devices with their name to use in the frontend. required: false type: list keys: name: description: Name for the device. required: false default: RFLink ID type: string sensor_type: description: Override automatically detected type of sensor. For list of values see below. required: true type: string unit_of_measurement: description: Override automatically detected unit of sensor. required: false type: string aliases: description: "(deprecated) Alternative RFLink ID's this device is known by." required: false type: [list, string] {% endconfiguration %}

Sensor type values:

• average_windspeed
• barometric_pressure
• battery
• weather_forecast
• doorbell_melody
• command
• co2_air_quality
• current_phase_1
• current_phase_2
• current_phase_3
• distance
• firmware
• humidity_status
• humidity
• hardware
• kilowatt
• light_intensity
• meter_value
• total_rain
• rain_rate
• revision
• noise_level
• temperature
• uv_intensity
• version
• voltage
• watt
• windchill
• winddirection
• windgusts
• windspeed
• windtemp

{% linkable_title Hiding/ignoring sensors %}

Sensors are added automatically when the RFLink gateway intercepts a wireless command in the ether. To prevent cluttering the frontend use any of these methods:

• Disable automatically adding of unconfigured new sensors (set automatic_add to false).
• Hide unwanted devices using customizations
• Ignore devices on a platform level

{% linkable_title Device support %}

See device support