2.5 KiB
layout, title, description, date, sidebar, comments, sharing, footer, logo, ha_category, ha_release, ha_iot_class
| layout | title | description | date | sidebar | comments | sharing | footer | logo | ha_category | ha_release | ha_iot_class |
|---|---|---|---|---|---|---|---|---|---|---|---|
| page | Raspberry Pi RF Switch | Instructions on how to integrate devices controlled via codes sent with low-cost GPIO RF modules on a Raspberry Pi into Home Assistant as a switch. | 2016-05-10 09:00 | true | false | true | true | raspberry-pi.png | DIY | 0.19 | Assumed state |
The rpi_rf switch platform allows you to control devices over 433/315MHz LPD/SRD signals with generic low-cost GPIO RF modules on a Raspberry Pi.
Interoperable with codes sniffed via the rpi-rf module or rc-switch. For more info see the PyPi module description: rpi-rf.
{% linkable_title Configuration %}
To enable, add the following to your configuration.yaml:
# Example configuration.yaml entry
switch:
- platform: rpi_rf
gpio: 17
switches:
bedroom_light:
code_on: 1234567
code_off: 1234568
ambilight:
pulselength: 200
code_on: 987654
code_off: 133742
living_room_light:
protocol: 5
code_on: 654321,565874,233555,149874
code_off: 654320,565873,233554,149873
signal_repetitions: 15
{% configuration %} gpio: description: GPIO to which the data line of the TX module is connected. required: true type: integer switches: description: The array that contains all switches. required: true type: list keys: entry: description: Name of the switch. Multiple entries are possible. required: true type: list keys: code_on: description: Decimal code(s) to switch the device on. To run multiple codes in a sequence, separate the individual codes with commas ','. required: true type: list code_off: description: Decimal code(s) to switch the device off. To run multiple codes in a sequence, separate the individual codes with commas ','. required: true type: list protocol: description: RF Protocol. required: false default: 1 type: integer pulselength: description: Pulselength required: false type: integer signal_repetitions: description: Number of times to repeat transmission required: false default: 10 type: integer {% endconfiguration %}