2.8 KiB
title, description
| title | description |
|---|---|
| HomeMatic | HomeMatic hardware support to turn you Home-Assistant into a CCU. |
You can't import an existing configuration, you'll need re-learn it into Home Assistant. There is an experimental WebUI alias Regahss support since 9.0 - before it was required to use a 3party tool.
Follow devices will be supported and tested:
{
"rf_enable": true,
"rf": [
{
"type": "CCU2",
"device": "/dev/ttyAMA0"
}
],
"wired_enable": false,
"wired": [
{
"serial": "xy",
"key": "abc",
"ip": "192.168.0.0"
}
],
"hmip_enable": false,
"hmip": [
{
"type": "HMIP_CCU2",
"device": "/dev/ttyUSB0"
}
]
}
{% configuration %} rf_enable: description: Enable or disable BidCoS-RF. required: true type: boolean default: false rf: description: RF devices. required: true type: list keys: type: description: Device type for RFD service. Look into the manual of your device. required: true type: string device: description: Device on the host. required: true type: string wired_enable: description: Enable or disable BidCoS-Wired. required: true type: boolean default: false wired: description: Wired devices. required: true type: list keys: serial: description: Serial number of the device. required: true type: string key: description: Encrypted key. required: true type: string ip: description: IP address of LAN gateway. required: true type: string hmip_enable: description: Enable or disable hmip. required: true type: boolean default: false hmip: description: HMIP devices. required: true type: list keys: type: description: Device type for RFD service. Look into the manual of your device. required: true type: string device: description: Device on the host. required: true type: string {% endconfiguration %}
Home Assistant configuration
Use the following configuration in Home Assistant to use it:
homematic:
interfaces:
rf:
host: core-homematic
port: 2001
wired:
host: core-homematic
port: 2000
hmip:
host: core-homematic
port: 2010
Raspberry Pi3
With HM-MOD-RPI-PCB you need to add follow into your config.txt on boot partition:
dtoverlay=pi3-miniuart-bt
HmIP-RFUSB
HassOS > 1.11 support HmIP-RFUSB default and don't need any configuration. If you run a Linux, you need to follow the installation guide from documentation to set up the UART USB interface on your computer.